Random pics (that you took) thread...

[FergusonTO35]

The 2.4 was pretty much ran low on oil, skipped time and bent all the intake valves.
Extended warranty on that one. They sent the engine too. After they paid me to remove the cylinder head, they didnt believe me the valves were bent..

In my experience, that is one of GM's better engines.

 

[Steve]

In my experience, that is one of GM's better engines.

The 2.4 is a good engine. They just suffer from drivers with poor maintenance habits.

 

[DuratecMan10]

My favorite GM engine is the 4.3 v6 in the Astro and Safari vans (the only GM vehicles and engine I like)


Sent from my iPhone using Tapatalk

 

[DuratecMan10]

My pal gave me his Grunt Style and Enlisted 9 sweatshirts. They don't fit him anymore, but they fit me!

 

[DuratecMan10]

Shelby GT500 poster put up in the shop.

 

[Steve]

My favorite GM engine is the 4.3 v6 in the Astro and Safari vans (the only GM vehicles and engine I like)


Sent from my iPhone using Tapatalk

I knew there was something wrong with you from the start!

 

[FergusonTO35]

The 2.4 is a good engine. They just suffer from drivers with poor maintenance habits.

Sadly we could say that about pretty much any vehicle nowadays.

 

[merc_man]

Took the little fella for a ride up town.

Sent from my SM-G950W using Tapatalk

 

[WillG]

Lund 1800 Alaskan I'm prepping for delivery at work. 90 Merc four-stroke for power.

Sent from my E6910 using Tapatalk

 

[ajschainsaws]

 

[merc_man]

Lund 1800 Alaskan I'm prepping for delivery at work. 90 Merc four-stroke for power.

Sent from my E6910 using Tapatalk

Thats a good looking boat.

Sent from my SM-G950W using Tapatalk

 

[WillG]

Thats a good looking boat.

Sent from my SM-G950W using Tapatalk

We sell quite a few of them.

Sent from my E6910 using Tapatalk

 

[redline4]

I could use one of these.

 

[Bigmac]

Working on an 86ish Trx250r motor with a 330 kit, it’s a mess! On tear down it needs a new crank bearings seals, transmission output shaft, clutch basket, shifter bushing, second gear, replacement cases and a new piston! Lol

 

[Steve]

Working on an 86ish Trx250r motor with a 330 kit, it’s a mess! On tear down it needs a new crank bearings seals, transmission output shaft, clutch basket, shifter bushing, second gear, replacement cases and a new piston! LolView attachment 220865View attachment 220866 View attachment 220867View attachment 220868

Wow! That thing has seen some use!

 

[Tbrown]

I could use one of these.

View attachment 220855

Me too, been looking. Maybe we split one.

 

[Bigmac]

Wow! That thing has seen some use!

It’s seen some use! And an idiot put it together! They put the clutch lock washer on backwards, so it wasn’t doing anything! The hub had an 1/8 inch of play, it should have none, and they also forgot the shifter bushing along with the 1” long starter bushing! It’s a mess, I have everything but the bearings and gaskets to fix it, but it’s going to be spendy!

 

[mdavlee]

Crappy day pulling the fifth wheel home. Mileage is way better with the little knob in the dash. I’ll be buying some 14 ply tires very soon.

 

[PissRev]

This was at the airport in Savannah Georgia.

 

[ajschainsaws]

Heh. I think this stuff is tygon? ANdrew can pipe in here as he sent it with the old jug. It looks and feel like tygon anyways.
I made the little fingers after I ran some water in the jug and it seemed to swirl a bit weakly at the intake side. I was relieved when I ran it again after I finished the fingers and saw how nice and strong and even the flow was. It sounded great and revved real nice. But I was mostly very happy when I shoved this thing in to some wood and it flat out performs. That 241 is a strong saw; it has compromised stratos, the new upgraded euro MTronic carb, 200psi compression, and ported all to hell - and the lil 4300 deserves to be in the same video. And I haven't even touched the other transfers on the 4300. After a tank of fuel, it sounds very nice. Got a good crackle to it.

Yeah Iam pretty sure it is