Random pics (that you took) thread...

[Stefanseiner]

"our" squirrel is every day visiting the balcony, searching for nuts (in winter, we feed some)

 

[Nutball]

Some patch thing i got at the fair today. I always thought this kinda stuff was a joke but my gosh it really works. The lady selling it really pushes for the insoles and socks and she wanted me to try them hut i said na not taking my work boots off pain to untie and tie back up. So she goes fine come here. And she done what she called a stabiluty test. One was she had me make two fist put on top each other and hold in front my chest. Then she grabbed fists and basically hung off them and of course i had to mave my footing to stay stable. So then she puts this patch on my arm and says wait 7 seconds and try again. Well holy crap she litterally had her feet off ground and i never had to move. Fricken weird. Then she says the patch is great for pain and buch of other things. So any how last couple days my back has been kinda sore and within five mi s of thisnpatch being on my pain has pretty much gone. Also i have a bit of vertgo that comes and goes. Well when i lay down or look up i get dizzy for a moment. With this thing on very little. This thing is ausome. She gave me an extra to try as well so gonna wait a while till my back hurts again and see what it does. Im not normally into this crap but this seems to work. Figured i would share as i know im not the only one with back trouble.

Sent from my SM-G950W using Tapatalk

There are balance and pressure point tricks where you can fool people: large guy can't lift small girl, but a small guy can type trick.

 

[00wyk]

Clear evening the other night.

 

[Bigmac]

Went fishing got a native coho, that I had to release, when I grabbed the hook with pliers he flopped hard an came off, and in that instant he wreck my spinner!

 

[ChipsFlyin]

There was a muscle car event in the autocross area yesterday. This beast was one of my favorites. From the ground - just awesome!

Look at the width of the Corvair's rear tires and compare to the Vette's . The ones leaning are 335s.

 

[00wyk]

Nice scooter.
That corvair is sexy AF. I always thought you could make a good race car out of one if ya stuffed huge tires out the back to keep it from swapping ends. Unsafe at any speed! Nader was such a pussy!

 

[HYPERSAWS]

Went fishing got a native coho, that I had to release, when I grabbed the hook with pliers he flopped hard an came off, and in that instant he wreck my spinner! View attachment 200118View attachment 200114 View attachment 200115View attachment 200116 View attachment 200117

How is the bite up there this year

 

[Bigmac]

How is the bite up there this year

It been pretty good, some days are better than others but there have been some great days, especially compared to last year!

 

[Bigmac]

There was a muscle car event in the autocross area yesterday. This beast was one of my favorites. From the ground - just awesome!
View attachment 200120
Look at the width of the Corsair's rear tires and compare to the Vette's . The ones leaning are 335s.
View attachment 200133

That is a sweet Corvair! Don’t see many that nice!!

 

[ChipsFlyin]

That is a sweet Corvair! Don’t see many that nice!!

I don't know why my spelling had an s instead of v. Must have been auto correct and me not paying attention.

You should have seen that sucker run!!!

I wanted to do a vid but was preoccupied. My friend had new slicks was busy figuring out the best tire pressures with temp changes, feel of grip and lap times. The track has most of the hard turns to the right so ended up setting the front left 1/2lb less and back right 1/2 lb more than the front rt and back left. At temp all of the pressures ended up the same and was able to knock off around 2 1/2 seconds on the best lap. I sure we could have done more but kept running into traffic when we were really making good time.

 

[merc_man]

So decided to go back up and watch this fellow carve some more. And after he was done doing this bear. Well he just did it rough. He sets it on the ground and says here ya go take it home. Its not done but play arpund if you wanna finish it.

Then we were talkin some more and he sends home a book with instructions for carving bears. So now im kinda excited to maybe give it a try. Come to findnout he only lives 15 mins from me. He said i could borrow his book if i like.

Sent from my SM-G950W using Tapatalk

 

[Steve]

So decided to go back up and watch this fellow carve some more. And after he was done doing this bear. Well he just did it rough. He sets it on the ground and says here ya go take it home. Its not done but play arpund if you wanna finish it.

Then we were talkin some more and he sends home a book with instructions for carving bears. So now im kinda excited to maybe give it a try. Come to findnout he only lives 15 mins from me. He said i could borrow his book if i like.

Sent from my SM-G950W using Tapatalk

Thats nice! Sounds like a real good dude!

 

[Dub11]

This has been like that for a month now. Scumbag landlord won't do anything and peeps be getting pissed.

Da bears

 

[Nutball]

I wonder what kind of flower this is, it has leaves like a red or silver maple.

 

[Steve]

Look what they sell at Menards for 9.99!

 

[Steve]

View attachment 200197
This has been like that for a month now. Scumbag landlord won't do anything and peeps be getting pissed.
View attachment 200198
Da bears

Get them jreds out Wayne and get crackin'

 

[Steve]

Went fishing got a native coho, that I had to release, when I grabbed the hook with pliers he flopped hard an came off, and in that instant he wreck my spinner! View attachment 200118View attachment 200114 View attachment 200115View attachment 200116 View attachment 200117

Damn Nathan! That was a hell of a fish to bust up a hook that size!

 

[Dub11]

Get them jreds out Wayne and get crackin'

Heres a street view pic.



I ain't that good lol. Plus the guy that owns it is a real *b-word. Years ago my parents rented a house from him and he tried to stiff them on the deposit. My Dad told him exactly how bad his ass was gonna get kicked. So Jon brought this big dude over. Dude was an ex con that went through the prison my Dad worked at. He didn't leave the truck and money was returned just like that.

 

[00wyk]

So decided to go back up and watch this fellow carve some more. And after he was done doing this bear. Well he just did it rough. He sets it on the ground and says here ya go take it home. Its not done but play arpund if you wanna finish it.

Then we were talkin some more and he sends home a book with instructions for carving bears. So now im kinda excited to maybe give it a try. Come to findnout he only lives 15 mins from me. He said i could borrow his book if i like.

Sent from my SM-G950W using Tapatalk

Carving is a hoot. I'm trying to get mroe in to it. This is my 390ESX with a carver on it.

 

[Dub11]

Carving is a hoot. I'm trying to get mroe in to it. This is my 390ESX with a carver on it.

For a quick short second I saw 390 a.d was thinking Husqvarna 390xp and was like DAMN!!!