Random pics (that you took) thread...

[chipper1]

All iced up after the freezin rain.

Sent from my SM-G950W using Tapatalk

Looked just like that here today waking up.
Just started raining here again and it's 32 and cooling off until around 8 when it starts warming into the 40's, we could have a lot more ice problems. I did a small job today, an 8" branch on a house/deck and then drove by a few friends around the corner, one had an 8" pine branch down. I stopped and started dicing it up for him and he came out when I was almost done, said that one came down today after he had cut the others up, it's a large pine!
My favorite picture from the day, they are calling for another 2/10", could get bad.

 

[Marshy]

Well dont leave me hangin, wtf does that piston belong to? Boat engine?

20 cylinder EMD-645, 2 cycle engine.
They used them in locomotive, marine and large standby gen sets.

 

[Bigmac]

Yesterday’s random pics....

 

[Steve]

Yesterday’s random pics....View attachment 163730View attachment 163731 View attachment 163732View attachment 163733 View attachment 163734

You live in a beautiful place!

 

[ajschainsaws]

You live in a beautiful place!

Yes agree with this

 

[ajschainsaws]

Got some custom flashing delivered and soldered on site
View attachment 163493 View attachment 163494
We were waiting on that and a good day to install/solder so we can finish the second story deck
View attachment 163495 View attachment 163496
I know it’s not as cold as a lot of of you guys are getting but it’s going to be cold for us! Lol

Taking shape now , looking good

 

[redline4]

Little more snow.

 

[TreeLife]

a four pack of beer that could get a man hammered. Sadly I am not allowed to partake anymore! A gift for a friend.

 

[Flint Mitch]

Good stuff!

Sent from my SM-G892A using Tapatalk

 

[chipper1]

Good stuff!

Sent from my SM-G892A using Tapatalk

What's up neighbor .
Here's one of many down here today, really wanted to get after this one, would have been easy pickings.
The county truck stopped by and said they wouldn't touch it because the cable wire it was resting on could be energized by an electrical wire, you mean by the electric that's above it and runs down to the transformer that it's not touching, okay .

 

[Bigmac]

Good stuff!

Sent from my SM-G892A using Tapatalk

Didn’t realize it was craft beer night..

 

[Bigmac]

Banshee, stock compression should be 125psi
Needs freshened up!

 

[Slacker]

Work says I cant have a rifle (long gun) in my car, but a pistol is ok.
Soooo....I built a pistol.
So silly, but I dont make the rules!

 

[stihl_head1982]

Work says I cant have a rifle (long gun) in my car, but a pistol is ok.
Soooo....I built a pistol.
So silly, but I dont make the rules!
View attachment 163855 View attachment 163856

Me likey.

 

[redline4]

 

[chipper1]

Work says I cant have a rifle (long gun) in my car, but a pistol is ok.
Soooo....I built a pistol.
So silly, but I dont make the rules!
View attachment 163855 View attachment 163856

Very nice, my buddy did the same thing for his van, it rides right between the front two seats in open sight.
My question is what type of work do you do.
I've got another buddy who is a transporter, the company he works for wrote the gun board and they have full access to carry concealed even in restricted areas, what a bum.

 

[Slacker]

Very nice, my buddy did the same thing for his van, it rides right between the front two seats in open sight.
My question is what type of work do you do.
I've got another buddy who is a transporter, the company he works for wrote the gun board and they have full access to carry concealed even in restricted areas, what a bum.

State employee.

 

[redline4]

Needs a trans output shaft seal.



Thats cool.
Now, where is it?!?

 

[stihl_head1982]

Work says I cant have a rifle (long gun) in my car, but a pistol is ok.
Soooo....I built a pistol.
So silly, but I dont make the rules!
View attachment 163855 View attachment 163856

The rules for these "pistols" are a matter of intrigue -- at least for me.
Your weapon is a fine specimen. I too am curious now of the nature of your work

 

[Steve]

Needs a trans output shaft seal.

View attachment 163920

Thats cool.
Now, where is it?!?

Yuk!