Random pics (that you took) thread...

[Barn Shop]

Only took me like a month and a half but I finally got the last load of fire wood from this job.
This load i used my MS660 clone with a 28" bar and as a back up my trusty 576 AutoTune with a 24" .404 bar and chain.

 

[Bigmac]

Got two nice chinook in the afternoon! Best of the year! The buck was a fast fish and the hen cut super nice! Put a fresh, 2000 era abu 6501 on with some mods

 

[Steve]

Only took me like a month and a half but I finally got the last load of fire wood from this job.
This load i used my MS660 clone with a 28" bar and as a back up my trusty 576 AutoTune with a 24" .404 bar and chain.





View attachment 310969 View attachment 310970 View attachment 310971

Nice truck!

 

[Steve]

Got two nice chinook in the afternoon! Best of the year! The buck was a fast fish and the hen cut super nice! Put a fresh, 2000 era abu 6501 on with some modsView attachment 310978View attachment 310979View attachment 310980View attachment 310981View attachment 310982

Nice fish!

 

[Only the Tony]

Got two nice chinook in the afternoon! Best of the year! The buck was a fast fish and the hen cut super nice! Put a fresh, 2000 era abu 6501 on with some modsView attachment 310978View attachment 310979View attachment 310980View attachment 310981View attachment 310982

Southpaw?

 

[Wilhelm]

Orchard tree killing spree from yesterday, this will kinda be the slaughter house.



Much easier firewood than messing with soaking and pressing paper, no?!
But, for those of You that do make paper bricks - a coworker of mine mixes wood chips into his paper mash.

 

[Wilhelm]

 

[Steve]

View attachment 311012

Careful! If it's a female that Fugger will bite your head off!

 

[Wilhelm]

Careful! If it's a female that Fugger will bite your head off!

Hehe, NOT my hand!!!

It's my sisters hand, that would make it a cat fight - YouTube here I come!

 

[Bigmac]

Southpaw?

I am righty but prefer a lefty reel. Any when casting it’s way easier for me

 

[Wolverine]

Ahfuckingmazing show Friday night!! I’m still blown away.

For those not familiar with the band, singer Les Claypool wears a pig mask sometimes. One of their songs well know is:

 

[Barn Shop]

Nice truck!

An 85 F250, 351 Windsor Auto
IT'S MY Wood Hauling, Deer Chasing, Fish getting Truck.

 

[Steve]

An 85 F250, 351 Windsor Auto
IT'S MY Wood Hauling, Deer Chasing, Fish getting Truck.

Damn, I was close. Was gonna say an 84. Love it. If it literally rust in half rebuild it better!

 

[davidwyby]

Noticed how wide the growth rings were in the center. Never have before. Residential Aleppo pine.


We’ve been at work all weekend fixing bearing failure damage on this steam filled roller for the paper co.

Not my pic. Deuces run on about anything, guy does this to mess with people at the pump…then dumps a bunch of oil in to offset the gas.


gotta replace the roof on my trailer. I bet it’s gonna be fuuuuun.
trans showed up for my 4runner. More fuuuun.

 

[Catman]

Let’s see what the catfish are doing tonight.

 

[Nutball]

Orchard tree killing spree from yesterday, this will kinda be the slaughter house.

View attachment 311009

Much easier firewood than messing with soaking and pressing paper, no?!
But, for those of You that do make paper bricks - a coworker of mine mixes wood chips into his paper mash.

Good idea for sawdust and noodles.

 

[Only the Tony]

I am righty but prefer a lefty reel. Any when casting it’s way easier for me

I cast with my right and then change hands with the rod. Done it my entire life, just can't reel very well with my left.

 

[Only the Tony]

Pictures to piss me off. Stator was cut when I had someone else do work on my truck. Been noticing strange heat issues and after flushing the system three times in the last year decided to put on a water pump. After bending a couple of rods holding the pump pulley and trying to drive the nut loose I chipped a fan blade. Cut the clutch off in front of pump and ground off the high spots so I could get the pulley off. Took standing on a 18" pipe wrench to get the cut piece off. Exactly why I hate having anyone else work on my stuff. Parts incoming.

 

[merc_man]

I cast with my right and then change hands with the rod. Done it my entire life, just can't reel very well with my left.

Same way I cast too

Sent from my SM-G950W using Tapatalk

 

[Steve]

View attachment 311096 View attachment 311097 View attachment 311098
Pictures to piss me off. Stator was cut when I had someone else do work on my truck. Been noticing strange heat issues and after flushing the system three times in the last year decided to put on a water pump. After bending a couple of rods holding the pump pulley and trying to drive the nut loose I chipped a fan blade. Cut the clutch off in front of pump and ground off the high spots so I could get the pulley off. Took standing on a 18" pipe wrench to get the cut piece off. Exactly why I hate having anyone else work on my stuff. Parts incoming.

Air hammer and a long chisel will knock that nut right off. Too late now though.

Yup! Too many hacks out there now. Very few mechanics.