Papa smurf China style

[redlinefever]

So buddy of mine bought 10 of these saws ! Brought them over for me to tune . In return he gave me one to experiment with.

 

[ammoaddict]

So buddy of mine bought 10 of these saws ! Brought them over for me to tune . In return he gave me one to experiment with.

Wow, that's a great deal.

Sent from my moto g(7) power using Tapatalk

 

[redlinefever]

Took spark plug out and looked into the hole and found pretty rough transfers so pulled it down to investigate so while it was apart I ported and advance timing .020 and muff modded . Wasn’t able to cut squish band for fear of free porting . So I ordered a pop up piston from hy way and installed new stihl wrist pin bearing and had to cut .004 out of squish band and set it at .019

 

[redlinefever]

Wow, that's a great deal.

Sent from my moto g(7) power using Tapatalk[/QUOTE
I agree he wanted to see what I could do with it ! Told him he can use it anytime if he wants

 

[redlinefever]

Here’s the haul

 

[redlinefever]

Pictures of in the process

 

[redlinefever]

Anyone no how to upload a video off ur phone?

 

[jacob j.]

I think you have to do Youtube or Vimeo.

 

[67L36Driver]

Very short clips work using Tapatalk. May take five to ten attempts. [emoji2959]

 

[redlinefever]

Ok thanks guess I’ll have to setup a account

 

[Wonkydonkey]

@MustangMike

Looks like you got someone wanting to look at your notes .............

 

[redlinefever]

 

[redlinefever]

Numbers are as follows from memory 97 exh 20 degrees blow down and the intake was big at 85 didn’t widen any on intake just shaped it better exhaust to 65%

 

[redlinefever]

Thanks for the help guys!

 

[redlinefever]

Also bone stock chain and first tank thru it!

 

[redlinefever]

Not to bad was hoping for. Little more but I’ll take it!

 

[redlinefever]

Might have to go back in and do a little epoxy it’s a little piggy on fuel