WANTED Oregon 3 rivet .404 tip

[jacktheripper]

I have a vintage 28” Oregon bar with the crescent shaped 3-rivet tip. Looking for a .404 tip for it. Let me know if you have one.

Thanks!

 

[how57]

I have a vintage 28” Oregon bar with the crescent shaped 3-rivet tip. Looking for a .404 tip for it. Let me know if you have one.

Thanks!

I got one. Sorry I didn’t get back to you sooner. Was having trouble with my well.

 

[Bill G]

The tips I keep around are not prejudice to pitch

 

[jacktheripper]

I got one. Sorry I didn’t get back to you sooner. Was having trouble with my well.

Heck yeah. Thanks! No worries at all.

 

[how57]

The tips I keep around are not prejudice to pitch

View attachment 468546

Nice!

 

[how57]

Heck yeah. Thanks! No worries at all.

It’s a little loose. But I have a rebuild kit for it.
I don’t have the rivets to attach it to the bar.

 

[jacktheripper]

View attachment 468577It’s a little loose. But I have a rebuild kit for it.
I don’t have the rivets to attach it to the bar.

How does a rebuild kit for these work? Do you drill the small rivets to split it open and replace the roller bearings?

 

[how57]

How does a rebuild kit for these work? Do you drill the small rivets to split it open and replace the roller bearings?

Yes. The tip stays together. Slip the kit in. And just rivet it back together. I like to dress the tip up. While the sprocket is out.

 

[jacktheripper]

Yes. The tip stays together. Slip the kit in. And just rivet it back together. I like to dress the tip up. While the sprocket is out.View attachment 468617

Woah, I never knew that could be done. Only one that I’ve had apart took itself apart at 11k rpm’s on a vintage homelite bar.

 

[ManiacalMark]

If a 3/8” is useful I could probably get rid of one.

 

[mainer_in_ak]

Got a new .404 one setting around somewhere. You can have it for free if u still need one.

 

[Bill G]

Got a new .404 one setting around somewhere. You can have it for free if u still need one.

Another good deal done