Oregon 26365 Bar Tip Greaser

[Brush Ape]

Another year. More less flawless performance; refilling is messy, trick is whack ya off a short hickory stick nice and round and ram it in the hole when she's full of grease to get the tip primed again. I love havin' this thing handy. I've had two Oregon bars in circulation for six years. One 16" with hundreds of cords and prob 100,000 limbs off plus a 28" with prob half million board feet and another couple hundred cords. Thing is metal never touches metal and how is it ever gonna wear? Tips are like new with no play. I have worn out many Stihl tips in less time. I've put five boxes of semi-skip thru that 28" bar and maybe a barrel and 1/2 of Smitty's Super S thru the groove. Just relentless bars if you do the maintenance.

 

[Brush Ape]

Pumpity pumpity Hickory dickory Yokohoma Ching Chong...

Let's get 'er done ladies.

 

[Brush Ape]

Get 'er drippin'!!! This stuff is the best. I may have just juiced a little....

 

[00wyk]

I have the 21939. Metal and sort of heavy.

https://www.chainsawbars.co.uk/product/21939-oregon-bar-grease-gun-and-grease/

 

[Brush Ape]

Here's a tip refilling these thang...

Take your needle greaser tip that is in your fullsize pump gun, take the Oregon greaser with the bar clamped in bench vise. Depress Oregon greaser into the hole in the nose bearing and pump the weep hole in the butt end of the Oregon greaser with your fullsize greaser. Takes coordination but pumps that sucker full with no air and then some.