Olympyk 945 oiler o rings

[rshawcityman]

I have a 1985 Olympyk/Efco/Oleo Mac chainsaw. I need to replace the seals on the bar oiler pump. I have found the basic o rings but it has 2 x rings or square o rings i cant find. It measures 7mmID 9mm OD and 2.2mm high. The picture shows its not just flat but its not exactly x shaped either. Does anyone know where i could get these?

 

[Dustin4185]

We have a local seal company in Knoxville that can get about any o-ring or seal out there. They also custom make them if they have the right size stock.

Signal industrial products is their name. Maybe you have something similar near you.

 

[hacskaroly]

I have a 1985 Olympyk/Efco/Oleo Mac chainsaw. I need to replace the seals on the bar oiler pump.

Welcome to the forums! Do you have the model number for the saw? With that we can look for an IPL (informational parts list) and see what the part number is and possibly find it that way.

Edit, nevermind about the model number, I just looked at the thread title...

 

[hacskaroly]

Does anyone know where i could get these?

Taking a quick look on e-bay, found a pic of an Olympyk 244F oiler, are these the o-rings you are talking about (assuming if you have a 244F or similar)?



Olympyk 244 F Oiler - $18.00 w/free shipping

 

[rshawcityman]

Taking a quick look on e-bay, found a pic of an Olympyk 244F oiler, are these the o-rings you are talking about (assuming if you have a 244F or similar)?

View attachment 439106

Olympyk 244 F Oiler - $18.00 w/free shipping

Yes mine is the 945af but that looks like the seals although that pump looks a little different

 

[rshawcityman]

Welcome to the forums! Do you have the model number for the saw? With that we can look for an IPL (informational parts list) and see what the part number is and possibly find it that way.

Edit, nevermind about the model number, I just looked at the thread title...

Thanks, Here's the exploded parts list

 

[rshawcityman]

We have a local seal company in Knoxville that can get about any o-ring or seal out there. They also custom make them if they have the right size stock.

Signal industrial products is their name. Maybe you have something similar near you.

Im not sure. Possibly.

 

[rshawcityman]

Im not sure. Possibly.

I checked and while there are local manufacturers they can't make the id that small (7mm) and even if they could its $75.00 for material and more for labor. Not worth it.

 

[rshawcityman]

Im not sure. Possibly.

Ill have to contact them

 

[hacskaroly]

Yes mine is the 945af but that looks like the seals although that pump looks a little different

Ok, well that at least gave me a better idea of how that type of o-ring is used having not taken an Olympyk apart. I looks to be one of those rare to find parts. Probably best bet is to keep watching e-Bay and waiting for an oiler assembly to show up and get it that way. They might end up being in good enough condition to just swap the assembly and not have to remove the o-ring and risk breaking it.

I am running into a similar situation with some air filters and other parts...getting to be really challenging to find.