- Local time
- 4:25 AM
- User ID
- 5546
- Joined
- Mar 8, 2018
- Messages
- 6,068
- Reaction score
- 45,952
- Location
- Evia, Greece
Mornin'. So I bought this 9000/9010 as a parts saw quite a while ago from Cole @Armbru84 . It was in bad shape and was locked tight. After getting it torn apart, I found some scoring, but the bottom end was locked up. The cylinder was in decent shape with only light transfer.
I was pretty afraid the crank was going to be shot, but after getting it torn down and the bearings removed, it was surprisingly good. The bearings had rusted and were the reason the saw was frozen up. It had about a pound of spruce needles in the thing too. Lol.
So, here goes the restoration of this derelict giant. Well, resto-mod.
These are Cole's pics...
I was pretty afraid the crank was going to be shot, but after getting it torn down and the bearings removed, it was surprisingly good. The bearings had rusted and were the reason the saw was frozen up. It had about a pound of spruce needles in the thing too. Lol.
So, here goes the restoration of this derelict giant. Well, resto-mod.
These are Cole's pics...
Last edited: