WANTED Oem 024 cylinder (not 024S)

[stihl saws]

Looking for a good 42mm, non super, oem cylinder.

 

[David Young]

I have one I don't know the status I think its a good one I'll check tonight
pm me your cell# or email addy.

David

 

[David Young]

Ok this one is 42mm diameter and 61mm base to squish band

The 026 was 62mm. I think it's what you need I'm cleaning it up and I'll get back to you

 

[David Young]

It looks like there is a helicoil in the plug

 

[David Young]

The ex port could have a little carbon cleared out. But bore looks clear and feels smooth.

If you or anyone is interested in this let me know

David

 

[rocketnorton]

subbed, got one here, too.

 

[stihl saws]

Measurements sound right. You have a PM.

 

[stihl saws]

subbed, got one here, too.

Pics please and thanks.

 

[rocketnorton]

 

[rocketnorton]

 

[rocketnorton]

for whatever reason, wont up the pic of plug hole...
dings in base are from losin its marbles... none in bore.

 

[David Young]

View attachment 43776 View attachment 43777

super neat, I have seen an 034 that looked like that and I may have heard of the 024 but never seen one. Do you know what the piston looked like was it windowed or slab sided?
in theory they should be lower performance but I always wondered if they would really be something with a little tweaking. I think a slab sided piston would be helpful on them.

 

[rocketnorton]

will look later.

 

[stihl saws]

super neat, I have seen an 034 that looked like that and I may have heard of the 024 but never seen one. Do you know what the piston looked like was it windowed or slab sided?
in theory they should be lower performance but I always wondered if they would really be something with a little tweaking. I think a slab sided piston would be helpful on them.

I've never seen one like that either. I'm curious about the piston also.

 

[rocketnorton]

windowed piston

 

[David Young]

Do you have calipers?

 

[rocketnorton]

yep. ???

 

[David Young]

Would you mind talk some port measurements? From the squish to the port open of the transfers and exhaust.

 

[rocketnorton]

ex opens 21mm below sq. trans 25.5.

 

[Jughead]

I have an open port.first I had seen other than the early 034's.