not so pros

[beaglebriar]

Evening fellas.

 

[beaglebriar]

Looks like this
View attachment 109643

Is it a good runner Kev?

 

[Stump Shot]

Should hunt down an xp cylinder for it. My xt was 3 years old then the bearings let go. Xt piston is too heavy

Had a lot to do with the bearings...

 

[huskihl]

Is it a good runner Kev?

Seems to be. I haven't taken it apart to check anything, but everything looked pretty clean out of the box

 

[huskihl]

Had a lot to do with the bearings...

SKF Explorers

They got replaced wif Nachi

 

[Stump Shot]

SKF Explorers

They got replaced wif Nachi

Dat'll work.

 

[beaglebriar]

I really like my XT with a little compression bump and some port work. Turned up a little too.

 

[p61 western]

Evening fellas.

Good evening DJ. How are you doing?

 

[huskihl]

Is it a good runner Kev?

Seems to be. I haven't taken it apart to check anything, but everything looked pretty clean out of the box

I lied. I went to cut farwood with it this summer and one of the muffler bolts was gone. Muff was rattling around. So I looked when I replaced that. Don't remember any scoring, so it musta been ok

 

[Czed]

One out 5 or 6 won't be to bad lol.

Going to leave this one at my nephew's
30 miles away
I won't have to carry a saw to and from when i drop tree's for him
Using his gas and bar oil too

 

[p61 western]

SKF Explorers

They got replaced wif Nachi

Good evening Kevin. How are you doing?

 

[beaglebriar]

I lied. I went to cut farwood with it this summer and one of the muffler bolts was gone. Muff was rattling around. So I looked when I replaced that. Don't remember any scoring, so it musta been ok

Ported or stock?

 

[huskihl]

I really like my XT with a little compression bump and some port work. Turned up a little too.

I'm sure they're runners. I just didn't want to take the chance again in 3 years with the bearing problems I've heard of. Plus, this Ping Ching jug and a Meteor was in the box.....

 

[huskihl]

Good evening Kevin. How are you doing?

I'm ok. Coffee and recliner

 

[Czed]

Saws in pretty good shape Dave.

Beat to death loggers saws are 3-400 here
I'll have around 250.00
In this
For a few minutes work.

 

[huskihl]

Ported or stock?

I ported it and used the original rwj and a 390 boot before I ever ran it

 

[Czed]

Looks like this
View attachment 109643

Haven't tried those
Been through many china
Cylinders
No real problems

 

[Stump Shot]

I'm sure they're runners. I just didn't want to take the chance again in 3 years with the bearing problems I've heard of. Plus, this Ping Ching jug and a Meteor was in the box.....

They hold up fine with a good bearing replacement of a proper metal caged bearing.

 

[beaglebriar]

Beat to death loggers saws are 3-400 here
I'll have around 250.00
In this
For a few minutes work.

Yeah you got a good deal on it. I paid around 200 for mine and it was in pieces. On the plus side it was all cleaned up and ready to go back together.

They're normally covered in goop when I get em.

 

[beaglebriar]

Good evening DJ. How are you doing?

About ready for bed. How are you?