not so pros

[Sty57]

I must of missed the memo.......Once again nobody likes me.

 

[Genius]

I must of missed the memo.......Once again nobody likes me.

It could be worst.

At least you aren't 27 and still relying on your parents to support you

 

[bikemike]

Not so pro. McCulloch eager beaver and pro mac 650 almost the same saw worked on cleaning up the eager beaver cleaning it up cause it was a runner. As I was tearing it down it was more than plugged up with oil and dust I do believe the saw was sealed up cause of the debris packed in it. Got the block started turning it over and seen oil getting pushed out and suckEd in. So I can't just slap it back together as is it looked to be seal or so called sealed up with exterior silicone. That didn't hold up. Since I had to tear into it I noticed the pro mac 650 has a wider exhaust port than the eager beaver so I matched the eager beaver port to match the pro mac. I hate these saws.
Then re sealed the block half and tighten up. Made new oil pick up line. sealed up the oil tank to the block. And made a new gasket for the oil pump. These saws suck to work on and have so much potential, for vac leaks. Hope today it might be assembled but my kids is being a pain in the ass.

 

[bikemike]

Not so pro. McCulloch eager beaver and pro mac 650 almost the same saw worked on cleaning up the eager beaver cleaning it up cause it was a runner. As I was tearing it down it was more than plugged up with oil and dust I do believe the saw was sealed up cause of the debris packed in it. Got the block started turning it over and seen oil getting pushed out and suckEd in. So I can't just slap it back together as is it looked to be seal or so called sealed up with exterior silicone. That didn't hold up. Since I had to tear into it I noticed the pro mac 650 has a wider exhaust port than the eager beaver so I matched the eager beaver port to match the pro mac. I hate these saws.
Then re sealed the block half and tighten up. Made new oil pick up line. sealed up the oil tank to the block. And made a new gasket for the oil pump. These saws suck to work on and have so much potential, for vac leaks. Hope today it might be assembled but my kids is being a pain in the ass.

 

[Genius]

Not so pro. McCulloch eager beaver and pro mac 650 almost the same saw worked on cleaning up the eager beaver cleaning it up cause it was a runner. As I was tearing it down it was more than plugged up with oil and dust I do believe the saw was sealed up cause of the debris packed in it. Got the block started turning it over and seen oil getting pushed out and suckEd in. So I can't just slap it back together as is it looked to be seal or so called sealed up with exterior silicone. That didn't hold up. Since I had to tear into it I noticed the pro mac 650 has a wider exhaust port than the eager beaver so I matched the eager beaver port to match the pro mac. I hate these saws.
Then re sealed the block half and tighten up. Made new oil pick up line. sealed up the oil tank to the block. And made a new gasket for the oil pump. These saws suck to work on and have so much potential, for vac leaks. Hope today it might be assembled but my kids is being a pain in the ass.

I got a box full of what u believe is 650's.

At one point one of them must have had a bad seal.

I guess the last guy to work on that saw decided that a good remedy to fix that seal was to smear JB Weld around it.

 

[bikemike]

And if they are sitting in a box he probably said screw it. They suck to work on.

 

[Genius]

And if they are sitting in a box he probably said screw it. They suck to work on.

Selling parts from that box is the only reason I'll even peek inside.

 

[Mastermind]

Hmmm, well I been called worse.

wank·er
ˈwaNGkər/
noun
Britishvulgar slang
noun: wanker; plural noun: wankers

1. a person who masturbates (used as a term of abuse).

You forgot Riff Raff....

Randy told us all to leave.


He can have his site. All the in fighting will come to bite him in the ass one of these days

View attachment 12826

But......but......you didn't go.

I banned someone yesterday......made me feel dirty.

I figure it like this though, if several members are complaining about someone........they probably ain't a good fit with this crowd.

Easier to nip it in the bud.....

Plus GFY

 

[Majorpayne]

You forgot Riff Raff....



But......but......you didn't go.

I banned someone yesterday......made me feel dirty.

I figure it like this though, if several members are complaining about someone........they probably ain't a good fit with this crowd.

Easier to nip it in the bud.....

Plus GFY

That's right Barney, nip it in the bud.

 

[bikemike]

Ok good news is I wasn't banned ok guys have a good day. Wife and I are puppy shopping either a Boston terrier or Australian shepherd both smart dogs

 

[bikemike]

Selling parts from that box is the only reason I'll even peek inside.

Well once I dig into the pro mac 650 il se if it's worth buying a recoil and starter paws n springs

 

[Genius]

You forgot Riff Raff....



But......but......you didn't go.

I banned someone yesterday......made me feel dirty.

I figure it like this though, if several members are complaining about someone........they probably ain't a good fit with this crowd.

Easier to nip it in the bud.....

Plus GFY

Great, now we need to hear T1 compline on SH about your unfair treatment and that everyone is ganging up on him.

 

[Mastermind]

Great, now we need to hear T1 compline on SH about your unfair treatment and that everyone is ganging up on him.

You must be thinking of someone else.

 

[DSS]

I'm here now

 

[Mastermind]

I'm here now

So?

Is there gonna be trouble?

Potato?

 

[Termitebuffet]

So?

Is there gonna be trouble?

Potato?

Watch the *p* wurd mister ....lol

Zoo City Sawz

 

[stihl sawing]

So?

Is there gonna be trouble?

Potato?

Probably, He's a cow.

 

[DSS]

So?

Is there gonna be trouble?

Potato?

Perhaps. I'm feeling squirrelly

 

[bikemike]

So?

Is there gonna be trouble?

Potato?

Yeppers

 

[Genius]

Mmm Bacon!!!