not so pros

[Time's Standing Stihl]

How's mike Clint today?

Sleepy, shouldn't of ate so much for breakfast. Breaks over now

 

[Stihl working Hard]

I changed it. Haven't run it enough yet to see

Curious to know if there are any more gains

 

[mdavlee]

Curious to know if there are any more gains

It seems there is. I had to reset it. It was running way rich.

 

[Stihl working Hard]

How's mike Clint today?

Good morning Mike Mike

 

[Stihl working Hard]

It seems there is. I had to reset it. It was running way rich.

Does it have the new updated coil on it

 

[mdavlee]

Does it have the new updated coil on itView attachment 59536

Yes. I think I'd like to have an earlier one

 

[Stihl working Hard]

Just turned the 'Ignore Dall' button off.

Now you've done it Bruce

 

[Mastermind]

Yes. I think I'd like to have an earlier one

I'll send you one with that top end.

 

[Stump Shot]

10,000 likes. The reward is one Free day with Mastermind or @Jon1212. 20,000 likes gets you a Gentleminded Custom avatar or user name.

You can send one of them on over, there's plenty of work around here to be done.

 

[mdavlee]

I'll send you one with that top end.

Thanks. I have a euro coil on the way as well.

 

[Stihl working Hard]

Yes. I think I'd like to have an earlier one

When you say earlier do you mean the original coil originally supplied

 

[mdavlee]

When you say earlier do you mean the original coil originally supplied

4700A, B, or C. The later ones were all getting richer.

 

[p61 western]

You can send one of them on over, there's plenty of work around here to be done.

Good morning Steve, how are you doing?

 

[Mastermind]

Thanks. I have a euro coil on the way as well.

You can keep the coil.......but ya gotta send my R&D jug back.

 

[mdavlee]

You can keep the coil.......but ya gotta send my R&D jug back.

Deal

 

[dall]

Now you've done it Bruce

lol whats that supposed to mean lol

 

[Stump Shot]

Good morning Steve, how are you doing?

Frustrated, yard is all blown to heck. Trying to get everything covered back up and such. Ever put a tarp on a lumber pile with a thirty five mile an hour wind? Can't stand to see that stuff get wet after all that work.

 

[Stihl working Hard]

4700A, B, or C. The later ones were all getting richer.

Mine had the 4700a on it when purchased was pinging its head off after a 30 second cut with a 36' bar

 

[mdavlee]

Mine had the 4700a on it when purchased was pinging its head off after a 30 second cut with a 36' bar

Way too lean for long cuts but maybe perfect for 3 cuts in 10x10square wood[emoji6]

 

[Stihl working Hard]

lol whats that supposed to mean lol

Unleashed the beast