Not So Pro 3

[Mastermind]

Good morning men.

 

[dall]

Good morning men.

Sleep in gramps?

 

[Mastermind]

Sleep in gramps?

I slept till 0700 this morning. Been on the phone for the last half hour though.

 

[ray benson]

Good morning. 48°F/ 9°C going up to 54°F/ 12°C.

 

[sawmikaze]

That's why i avoid the city as much as possible. We are headed to Erie this morning to fly fish for Steelhead.

Are you going to Elk or Walnut creek ?

 

[John Wargo]

Are you going to Elk or Walnut creek ?

My buddy had the location pin. But guide wasn't happy with the water flow

 

[Tor R]

I want to apologize for Sunday, I didn't knew Dallas was down like he is, later (days) I found out it was serious.
I don't kick a man who is down even if he calls me a fuking this and that.
Sorry for what you experienced on Sunday Dallas.


I regret that I logged in on Sunday, could have saved myself and others from all that *s-word.
Since it is so toxic nowadays, it is best to stay away, my English is far from good, it's easy to say something that gets picked up wrongly, and I don't want to be someone who is seen as "stir the pot" a troll, maybe just because I have a slightly different opinion than the majority here.

Whether I will ever log in again is rather doubtful.


I have a lot going on, some project saws, 238, 242, a house, a farm building, a couple roads, Øsa, hunting, chainsaw parts will arrive next week, today the last module for the tractor lights arrived, should keep me active.

Right now I'm pressure testing a 550 xpg mkII, not mine.
Next up is a ported 560 mk1 2021 model, not mine, which a so-called famous porter from Sweden has done, the little I could see in the EX port does not impress me. I'm hoping to find faults in sealing rings or bearings so I can pop the top end to see his work in detail.


Before I go, I wish you all, all the best, that your dreams come true and that you have a long, good life with good health, and that you feel that your country loves you for who you are.



ciao ragazzi

 

[Mastermind]

I want to apologize for Sunday, I didn't knew Dallas was down like he is, later (days) I found out it was serious.
I don't kick a man who is down even if he calls me a fuking this and that.
Sorry for what you experienced on Sunday Dallas.


I regret that I logged in on Sunday, could have saved myself and others from all that *s-word.
Since it is so toxic nowadays, it is best to stay away, my English is far from good, it's easy to say something that gets picked up wrongly, and I don't want to be someone who is seen as "stir the pot" a troll, maybe just because I have a slightly different opinion than the majority here.

Whether I will ever log in again is rather doubtful.


I have a lot going on, some project saws, 238, 242, a house, a farm building, a couple roads, Øsa, hunting, chainsaw parts will arrive next week, today the last module for the tractor lights arrived, should keep me active.

Right now I'm pressure testing a 550 xpg mkII, not mine.
Next up is a ported 560 mk1 2021 model, not mine, which a so-called famous porter from Sweden has done, the little I could see in the EX port does not impress me. I'm hoping to find faults in sealing rings or bearings so I can pop the top end to see his work in detail.


Before I go, I wish you all, all the best, that your dreams come true and that you have a long, good life with good health, and that you feel that your country loves you for who you are.



ciao ragazzi

I'd rather see you stay my friend. We've lost far too many members already.

 

[GCJenks204]

I want to apologize for Sunday, I didn't knew Dallas was down like he is, later (days) I found out it was serious.
I don't kick a man who is down even if he calls me a fuking this and that.
Sorry for what you experienced on Sunday Dallas.


I regret that I logged in on Sunday, could have saved myself and others from all that *s-word.
Since it is so toxic nowadays, it is best to stay away, my English is far from good, it's easy to say something that gets picked up wrongly, and I don't want to be someone who is seen as "stir the pot" a troll, maybe just because I have a slightly different opinion than the majority here.

Whether I will ever log in again is rather doubtful.


I have a lot going on, some project saws, 238, 242, a house, a farm building, a couple roads, Øsa, hunting, chainsaw parts will arrive next week, today the last module for the tractor lights arrived, should keep me active.

Right now I'm pressure testing a 550 xpg mkII, not mine.
Next up is a ported 560 mk1 2021 model, not mine, which a so-called famous porter from Sweden has done, the little I could see in the EX port does not impress me. I'm hoping to find faults in sealing rings or bearings so I can pop the top end to see his work in detail.


Before I go, I wish you all, all the best, that your dreams come true and that you have a long, good life with good health, and that you feel that your country loves you for who you are.



ciao ragazzi

What Randy said. We are all men, in that we can have a heated conversation and move on. As Ted Lasso would say "Be a goldfish".

 

[cuinrearview]

I want to apologize for Sunday, I didn't knew Dallas was down like he is, later (days) I found out it was serious.
I don't kick a man who is down even if he calls me a fuking this and that.
Sorry for what you experienced on Sunday Dallas.


I regret that I logged in on Sunday, could have saved myself and others from all that *s-word.
Since it is so toxic nowadays, it is best to stay away, my English is far from good, it's easy to say something that gets picked up wrongly, and I don't want to be someone who is seen as "stir the pot" a troll, maybe just because I have a slightly different opinion than the majority here.

Whether I will ever log in again is rather doubtful.


I have a lot going on, some project saws, 238, 242, a house, a farm building, a couple roads, Øsa, hunting, chainsaw parts will arrive next week, today the last module for the tractor lights arrived, should keep me active.

Right now I'm pressure testing a 550 xpg mkII, not mine.
Next up is a ported 560 mk1 2021 model, not mine, which a so-called famous porter from Sweden has done, the little I could see in the EX port does not impress me. I'm hoping to find faults in sealing rings or bearings so I can pop the top end to see his work in detail.


Before I go, I wish you all, all the best, that your dreams come true and that you have a long, good life with good health, and that you feel that your country loves you for who you are.



ciao ragazzi

Bullshït

 

[sawmikaze]

That's why i avoid the city as much as possible. We are headed to Erie this morning to fly fish for Steelhead.

I've caught some biiig steelhead on Walnut.

 

[bigbadbob]

. Been on the phone for the last half hour though.

Your car warranty up??

 

[bigbadbob]

Mornin wet cool 34f
coffee
off to dealer for 661 parts.

 

[Mastermind]

Your car warranty up??

My newest automobile is 20 years old.....so yes. The answer is yes.

 

[sawmikaze]

My buddy had the location pin. But guide wasn't happy with the water flow

Speaking of...

You know people in Erie call Yinzers Muperes ?

They say everyone from the burg always says mupere from Picksburg

 

[redline4]

17 Colorado 3.6 starter.

 

[3browns]

Guide just called back. Water didn't come up enough. Trip is now off. I was literally walking out the door to leave.

Sorry man

Hope you can reschedule or something, depending on the weather of course

 

[3browns]

Morning men, 24 and blowing but snow is no longer forecast for today and tomorrows forecast for snow is almost gone as well

Coffee, it's what's for breakfast

 

[Lnk]

I want to apologize for Sunday, I didn't knew Dallas was down like he is, later (days) I found out it was serious.
I don't kick a man who is down even if he calls me a fuking this and that.
Sorry for what you experienced on Sunday Dallas.


I regret that I logged in on Sunday, could have saved myself and others from all that *s-word.
Since it is so toxic nowadays, it is best to stay away, my English is far from good, it's easy to say something that gets picked up wrongly, and I don't want to be someone who is seen as "stir the pot" a troll, maybe just because I have a slightly different opinion than the majority here.

Whether I will ever log in again is rather doubtful.


I have a lot going on, some project saws, 238, 242, a house, a farm building, a couple roads, Øsa, hunting, chainsaw parts will arrive next week, today the last module for the tractor lights arrived, should keep me active.

Right now I'm pressure testing a 550 xpg mkII, not mine.
Next up is a ported 560 mk1 2021 model, not mine, which a so-called famous porter from Sweden has done, the little I could see in the EX port does not impress me. I'm hoping to find faults in sealing rings or bearings so I can pop the top end to see his work in detail.


Before I go, I wish you all, all the best, that your dreams come true and that you have a long, good life with good health, and that you feel that your country loves you for who you are.



ciao ragazzi

Stick around @Tor R , you are needed here. Nobody else here we can learn about your neck of the woods. Like your hunting methods.

 

[Kiwioilboiler]

From what I had seen it had to do with Māori self governance. Treaty of Waitangi from what I can see made the Māori british subjects and yet left them with chieftainship over their lands and villages. What are the changes being proposed? And can we find a way to get Dallas a Māori wife? Kind of a mail order bride kind of thing except we send him to you. Maybe a strong independent woman like the one in the video could straighten him out.

If he'd been here long enough Dallas would be in a lot better shape Tony.
Free, but slow and often antiquated, healthcare.

The "aunty" to look after him. Still possible surprisingly.

And yeah you'd love the fishing and hunting stuff. Different from how you guys do it, but still all here in some form.