Not So Pro 3

[Mastermind]

It's just plain crappy wire Tim. This hasn't seen light of day since it was assembled and that wire is under tape and loom. Whatever mud hut the harnesses are assembled in is where they are getting screwed up.

I blame the Indonesian 12 year olds.

 

[timg]

Wiring can be frustrating especially on can bus circuits. I share Ed's pains.

 

[timg]

@John Wargo rain coming your way. Better get the Kawasaki home.

 

[John Wargo]

@John Wargo rain coming your way. Better get the Kawasaki home.

I made it safe Timmy. Big Red and I are at Yolanda's in Monaca now. Going to Hank's for a little dessert. You ready for some 410 action? @JoeDirt is.

 

[JoeDirt]

I made it safe Timmy. Big Red and I are at Yolanda's in Monaca now. Going to Hank's for a little dessert. You ready for some 410 action? @JoeDirt is.

Larson dominated at Las Vegas on Sunday... I'm ready for some High Limit action with the Sharon Speedway slacker gang.

 

[Mastermind]

I need a nap.

 

[beaglebriar]

Welp....that 1700.00 tooth is in the trash.

Did ya punch the prick that talked you into it?

 

[beaglebriar]

I need a nap.

Me too. A couple late nights of boiling and one kid that might get strangled has really been fukkin with my sleep.

 

[Lnk]

Did ya punch the prick that talked you into it?

That's how the tooth got removed. He punched himself in the mouth. Lol

 

[beaglebriar]

Of course the wire needs to be broke where the loom is jammed between the frame and cab..

View attachment 410623

The kids truck has dead short in the turn signal circuit. One headlight parted ways with the truck in the crash and pulled the connector off, now it blows the fuse immediately. Does it on both left and right. We ordered a cheap tracer off Amazon I hope it works. It will save a lot of BS I think.

 

[full chizel]

Randy doesn’t like sharing his crayons

He hoards the purple ones

 

[redline4]

I blame the Indonesian 12 year olds.

They are inscrutable.

Wiring can be frustrating especially on can bus circuits. I share Ed's pains.

Sometimes that can be easier though because you can ohm from a module in each direction of the data circuits and you should get the terminating resistor measurement. It at least points a direction.
We have high speed, low speed, the most network is a fućking nightmare at times and used on the infotainment stuff. Local interconnect, etc.. probably same type of data circuits you use.

 

[dall]

Me too. A couple late nights of boiling and one kid that might get strangled has really been fukkin with my sleep.

you need a couple more kids that act just like how you was at their age lol

 

[Mastermind]

Glenda got home from grocery shopping with the granddaughter. No nap for ol Randy.

 

[dall]

Glenda got home from grocery shopping with the granddaughter. No nap for ol Randy.

good

 

[timg]

They are inscrutable.


Sometimes that can be easier though because you can ohm from a module in each direction of the data circuits and you should get the terminating resistor measurement. It at least points a direction.
We have high speed, low speed, the most network is a fućking nightmare at times and used on the infotainment stuff. Local interconnect, etc.. probably same type of data circuits you use.

Yes, prolly the same high and low circuits with two 120 ohm resistors. Main problem is isolating can circuits between 8-10 controllers. As you have to disconnect each one individually to help isolate a controller, wire,resistor, or multi junction connector melt down. But hey it keeps ya thinking. Just have days where my grey beard is a little more greyer. Had the spell out the grey word for some on here.

 

[Mastermind]

He hoards the purple ones

They taste like grapes.

good

What's good about it?

 

[dall]

They taste like grapes.

What's good about it?

i didnt get a nap either

 

[redline4]

You guys sure sleep a lot.

 

[dall]

They taste like grapes.

What's good about it?

i didnt get a nap either

i bet @Loony661 and @stihl livin had a nap today