Not So Pro 3

[dall]

I know what you're saying. My statement was more of a blanket statement for my needs & uses, and what tools aren't even available in the M12 line, no router, no screwgun, no sawall in the M12 line. There's only one tool in the M12 line I would use regularly if I owned it. A 1/4" hex impact driver.

I compared the M12 vs M18 impact drivers side by side when I was fixing to buy one. The M12 impact driver is almost 1/2" longer in overall length, compared to a M18 impact driver. Power specs M12 is 1,500 in/lbs, M18 is 2,000 in/lbs. I figured what's the point of having a M12 impact driver, that's longer in overall length, so the head won't fit in as tight of spaces, and it has less power. So I went with the M18 impact driver. Plus the M12 just felt weird and unbalanced in my hands.

I'm sure most of the M12 tools are great tools. There is just none of them I would use regularly if I had them. Yes the chargers are set up for both platforms, which is nice for guys who have both.

you should see how small the new 1/4 impact is

 

[Loony661]

did you tell your wife or is she the same one ?

Naw, I was being sarcastic. Not real, so take that out of you mind.

 

[beaglebriar]

You’re right it was rude of me to steal Mike’s nickname… I fixed it for you.

 

[dall]

Naw, I was being sarcastic. Not real, so take that out of you mind.

So your cousin is a guy ?

 

[Loony661]

So your cousin is a guy ?

What?! No. You definitely think more gay thoughts than anyone I know.

 

[Lnk]

your the one leaving the state for coffee

just like the ones who go out for milk and never return lol

It's cigarettes. And he will be back, he just went out for cigarettes!

 

[dall]

What?! No. You definitely think more gay thoughts than anyone I know.

Lmao
I like trolling and going fishing lol
And damn you are easier than your cousin

 

[Loony661]

Lmao
I like trolling and going fishing lol
And damn you are easier than your cousin

You are a professional troller, there’s no doubt about that. But I’m also not as wound up as you probably think I am.

 

[Lnk]

@Mastermind
How about a age limit to post here.

Upper age limit, or lower age limit?

 

[p61 western]

Don't be bringing geometry up in this bitćh.

Ask him about diagonal stuffs

 

[p61 western]

You’re right it was rude of me to steal Mike’s nickname… I fixed it for you.

Funny wait not funny lol

 

[Lnk]

Is weight shifting the act of putting your pecker in your left hand for a predetermined timeframe and then transferring it to your right hand?
Asking for Dallas.

When you get good enough, you can swap hands and gain a stroke!

 

[maulhead]

you should see how small the new 1/4 impact is

I've compared the 3453 (which is the new one) to the 2853 & 2953, in hand at stores.

If you hold them up next to each other, head to head, the 3453 is almost 1/2 longer in over all length (front to back). Diameter or side to side the 3453 is smaller thou. It's odd to me they made the 3453 longer in the head, then it's big brother. Yeah the M18 is a bigger tool in girth, but it's shorter in the head length wise.

Sometimes putting in backing (that carpenters forgot) having a 1/2" shorter tool makes a difference. The head size AKA length, squeezing in a tight space, is where it's at for me & my needs.

 

[dall]

You are a professional troller, there’s no doubt about that. But I’m also not as wound up as you probably think I am.

lol not trying to get you upset or anything
Just tormenting you
Just like you torment your wife with your tiny dick lol

 

[dall]

I've compared the 3453 (which is the new one) to the 2853 & 2953, in hand at stores.

If you hold them up next to each other, head to head, the 3453 is almost 1/2 longer in over all length (front to back). Diameter or side to side the 3453 is smaller thou. It's odd to me they made the 3453 longer in the head, then it's big brother. Yeah the M18 is a bigger tool in girth, but it's shorter in the head length wise.

Sometimes putting in backing (that carpenters forgot) having a 1/2" shorter tool makes a difference. The head size AKA length, squeezing in a tight space, is where it's at for me & my needs.


View attachment 407538

Smaller than the one you have pictured

 

[maulhead]

Smaller than the one you have pictured

I was comparing Fuel M12 to Fuel M18.

That one in yer pic's, is the 3650, which is brushless version, but it's a not Fuel.

 

[beaglebriar]

Smaller than the one you have pictured

I have the older m12. It’s stupid long but is fine for saw work.

 

[Loony661]

lol not trying to get you upset or anything
Just tormenting you
Just like you torment your wife with your tiny dick lol

I’m not upset at all, actually laughing here and the kids keep looking at me funny. We’re good!

 

[maulhead]

Smaller than the one you have pictured

I almost bought a 3650-21 last weekend at the depot, they had it on close out, for $69.

Impact, one 2.0 battery, charger, and tool bag. $69 is a heck of a deal.

But I have two M18 impact drivers I'm waiting on to die before I buy more stuff. I'm not a hoarder.

 

[dall]

I almost bought a 3650-21 last weekend at the depot, they had it on close out, for $69.

Impact, one 2.0 battery, charger, and tool bag. $69 is a heck of a deal.

But I have two M18 impact drivers I'm waiting on to die before I buy more stuff. I'm not a hoarder.

Full of *s-word
Mine is the 3650-20