Not So Pro 3

[p61 western]

lol maybe you need to sit in a water trough with fire under it ?
and im not into guys lol

Hot tub and guys? Sheesh but I won’t judge

 

[dall]

Sounds like you wanna rub his back.

How often do you have homosexual thoughts ?

 

[John Wargo]

If he's not @41FanForLife 's kid
He should go to his school to be trained by himView attachment 407512
For carpentry and stuff.

Looks like they almost got it right. At least the water will hit the sink

 

[dall]

Hot tub and guys? Sheesh but I won’t judge

lol figured he needed a bath is all

 

[p61 western]

Looks like they almost got it right. At least the water will hit the sink

Angles are off a little bit

 

[Loony661]

How often do you have homosexual thoughts ?

Less than you. That’s a fact.

 

[dall]

Less than you. That’s a fact.

not sure how you can say that when you think about it all the time

 

[Loony661]

 

[Mastermind]

View attachment 407531

I learned about sex on the school bus.

 

[beaglebriar]

Huh that’s weird…
View attachment 407529

Dick!!

 

[beaglebriar]

I learned about sex on the school bus.

Obviously before background checks were required for bus drivers…

 

[redline4]

Angles are off a little bit

Don't be bringing geometry up in this bitćh.

 

[Mastermind]

Obviously before background checks were required for bus drivers…

When I was in school, high school students drove the buses.

 

[dall]

View attachment 407531

So you had drivers education with your cousin?

 

[Woodpecker]

When I was in school, high school students drove the covered wagons…

Fix’d for historical accuracy ‘n stuffs.

 

[Loony661]

So you had drivers education with your cousin?

Doesn’t matter, she was hot.

 

[Woodpecker]

Dick!!

You’re right it was rude of me to steal Mike’s nickname… I fixed it for you.

 

[dall]

Doesn’t matter, she was hot.

did you tell your wife or is she the same one ?

 

[maulhead]

I tend to agree and disagree. The M12 series of tools are adapted to power demands for certain tools. Their compact drills are fantastic when a bigger drill just won’t allow you to do precision work. The small impact is is great especially on saws and smaller projects where the bigger ones are cumbersome and tend to over torque. Also since the charger handles both there so real disadvantage there.

I know what you're saying. My statement was more of a blanket statement for my needs & uses, and what tools aren't even available in the M12 line, no router, no screwgun, no sawall in the M12 line. There's only one tool in the M12 line I would use regularly if I owned it. A 1/4" hex impact driver.

I compared the M12 vs M18 impact drivers side by side when I was fixing to buy one. The M12 impact driver is almost 1/2" longer in overall length, compared to a M18 impact driver. Power specs M12 is 1,500 in/lbs, M18 is 2,000 in/lbs. I figured what's the point of having a M12 impact driver, that's longer in overall length, so the head won't fit in as tight of spaces, and it has less power. So I went with the M18 impact driver. Plus the M12 just felt weird and unbalanced in my hands.

I'm sure most of the M12 tools are great tools. There is just none of them I would use regularly if I had them. Yes the chargers are set up for both platforms, which is nice for guys who have both.

 

[dall]

I know what you're saying. My statement was more of a blanket statement for my needs & uses, and what tools aren't even available in the M12 line, no router, no screwgun, no sawall in the M12 line. There's only one tool in the M12 line I would use regularly if I owned it. A 1/4" hex impact driver.

I compared the M12 vs M18 impact drivers side by side when I was fixing to buy one. The M12 impact driver is almost 1/2" longer in overall length, compared to a M18 impact driver. Power specs M12 is 1,500 in/lbs, M18 is 2,000 in/lbs. I figured what's the point of having a M12 impact driver, that's longer in overall length, so the head won't fit in as tight of spaces, and it has less power. So I went with the M18 impact driver. Plus the M12 just felt weird and unbalanced in my hands.

I'm sure most of the M12 tools are great tools. There is just none of them I would use regularly if I had them. Yes the chargers are set up for both platforms, which is nice for guys who have both.

you should see how small the new 1/4 impact is