Not So Pro 3

[cuinrearview]

Don't fugg with Crane Man Joe. Old guys just might surprise you. He may have a secret sack kick for you tucked away. LOL

The ex-fil always says "youth and exuberance is no match for old age and treachery". I believe him.

Good morning men.

 

[nbbt]

Good morning fellas. 21f to 31f today with some white stuffs coming, or so they say.

 

[Loony661]

Good morning fellas. Up and at’em this morning - gotta get to town and go to my DOT physical appt, and get adjusted, at the chiropractor. 10-20 mph winds here today, blowing in some weather for later. Tomorrow we’re supposed to see 20-30 mph with 40 mph gusts while it snows.

 

[GCJenks204]

Morning / Evening All.
Have cleared customs so technically in ‘Merica now…
GFY’s all around as I am on to ATL and then DFW, sucks that the weather in Dallas looks to be pretty yoyoish this week

 

[redline4]

Morning / Evening All.
Have cleared customs so technically in ‘Merica now…
GFY’s all around as I am on to ATL and then DFW, sucks that the weather in Dallas looks to be pretty yoyoish this week

Safe travels.
Too bad you aren't going to someplace cool vs a couple of our big cess pools.

 

[full chizel]

Morning / Evening All.
Have cleared customs so technically in ‘Merica now…
GFY’s all around as I am on to ATL and then DFW, sucks that the weather in Dallas looks to be pretty yoyoish this week

Any chance you’re doing a meat and greet near Warner Robbins?

 

[GCJenks204]

Safe travels.
Too bad you aren't going to someplace cool vs a couple of our big cess pools.

Any chance you’re doing a meat and greet near Warner Robbins?

Only in ATL for a few hours, going to hit the SkyClub and get my drink on.
I like Dallas, we’re pretty regimented in what we do when we are there but manage to have lots of fun and stay safe. Deep Elum is always fun on a Friday night.

 

[full chizel]

Only in ATL for a few hours, going to hit the SkyClub and get my drink on.
I like Dallas, we’re pretty regimented in what we do when we are there but manage to have lots of fun and stay safe. Deep Elum is always fun on a Friday night.

Go to a Stars game. Probably can’t get tix though

 

[ray benson]

Good morning. 32°F/ 0°C going up to 37°F/ 3°C. An inch or two of snow is coming tonight.

 

[John Wargo]

Good morning fellas. Up and at’em this morning - gotta get to town and go to my DOT physical appt, and get adjusted, at the chiropractor. 10-20 mph winds here today, blowing in some weather for later. Tomorrow we’re supposed to see 20-30 mph with 40 mph gusts while it snows.

@dall isn't a doctor but I'm sure he would be glad to give you a physical

 

[farminkarman]

Good morning Fellas. Supposedly more white stuff on the way later on.

 

[nbbt]

Been way to productive already this morning. Wife's car remotes were operating intermittently. I expected low voltage batteries. Not the case this time. Opened and found that both had solder connections that had come loose that hold the coin cell frame in place.
Reflowed and added a bit of additional solder, one working perfectly and the second working most of the time.

I'm thinking that the conductive material is nearing end of life on the one that's not 100%. Now where did I place that replacement part?

 

[Loony661]

@dall isn't a doctor but I'm sure he would be glad to give you a physical

 

[3browns]

Morning, 25 and about 6" of new snow overnight but supposed to clear up later and get sunny

 

[Woodrow]

Good morning fellas.

 

[3browns]

I want to know which one of you demented MFERS turned your Holstein bull loose in muh moose pen?

 

[redline4]

Been way to productive already this morning. Wife's car remotes were operating intermittently. I expected low voltage batteries. Not the case this time. Opened and found that both had solder connections that had come loose that hold the coin cell in place.
Reflowed and added a bit of additional solder, one working perfectly and the second working most of the time.

I'm thinking that the conductive material is nearing end of life on the one that's not 100%. Now where did I place that replacement part?

If there's a rubber overlay on the contact points, wipe those off with a cloth. They tend to build up some carbon or whatever deposits over time from the small arc that happens when contact is made

 

[nbbt]

If there's a rubber overlay on the contact points, wipe those off with a cloth. They tend to build up some carbon or whatever deposits over time from the small arc that happens when contact is made

Cleaned the boards on both when apart. With a eye loupe you could see that slight carbon film on the copper.
Thanks, Ed.

 

[redline4]

Got a poon wagon in here today, kids.

I'm afraid to test drive it because the bìtches will all come runnin

 

[farminkarman]

Got a poon wagon in here today, kids.
View attachment 403361
I'm afraid to test drive it because the bìtches will all come runnin

lol....where the heck has that truck been hiding? Definitely hasn't been on the salt covered roads too much.