Not So Pro 3

[JoeDirt]

This fat kid is ready for a cheeseburger and a nap after today. Got all this oak quartered and ready to split. Wouldn't have been so bad but its on a hillside and that just makes everything a PITA.

And I got the deck swapped out for the plow and weights on the Cub. The deck is a heavy Mfer, I think around 300 lbs IIRC and by the time you get done pulling the deck off and putting it away, the plow seems that heavy.

 

[Mastermind]

Happy Thanksgiving mfers !!!!!

 

[JugHead27]

Happy Thanksgiving mfers !!!!!

View attachment 356046

The bottom cinder block is setting the wrong way lol. They’re stronger when openings vertical

 

[Lnk]

Well after giving it a bit more tension on the spring, my .300WM was doing the same thing.
View attachment 356036

I took it apart for the billionth time, this time I bent the sheet metal box mag "wider".
It seems to be operating as intended right now.
But, I'm stil

Happy Thanksgiving mfers !!!!!

View attachment 356046

Nice jackstands! Be careful and flip that bottom block.

 

[Lnk]

The bottom cinder block is setting the wrong way lol. They’re stronger when openings vertical

I should have read one more reply before replying. Lol

 

[JugHead27]

got caught up in a chit blizzard

 

[Mastermind]

The bottom cinder block is setting the wrong way lol. They’re stronger when openings vertical

That one is full of concrete. No worries.

 

[Kiwioilboiler]

Just watched a tyre fitter do up the wheel nuts on that TT by going round and round in circles. No star pattern whatsoever.

FFS.

 

[Woodrow]

I'd quit.

Only a few more years to retire. Really looking forward to that.

 

[Agent Smith]

Just watched a tyre fitter do up the wheel nuts on that TT by going round and round in circles. No star pattern whatsoever.

FFS.
View attachment 356077

That diesel tank looks to be quite a trooper

 

[Kiwioilboiler]

That diesel tank looks to be quite a trooper

More hits than Elvis.

 

[Bilge Rat]

Well after giving it a bit more tension on the spring, my .300WM was doing the same thing.
View attachment 356036

I took it apart for the billionth time, this time I bent the sheet metal box mag "wider".
It seems to be operating as intended right now.
But, I'm still going to convert it to a detachable box.

It could be the mag lips releasing the round early. Most feeding problems are caused by the mag feed lips.

 

[maulhead]

I'd quit.

Great - there's the next catchphrase we will see, hundreds of times, in dozens of threads, over the coming months.

 

[maulhead]

View attachment 356076
got caught up in a chit blizzard

Looks like snow to me.

 

[maulhead]

Happy Thanksgiving mfers !!!!!

View attachment 356046

If you plumb your air shocks to the back bumper, then you don't need to take the tire off to add air....

 

[hoskvarna]

Happy Thanksgiving mfers !!!!!

View attachment 356046

Same to you boss
And everyone else too [emoji884][emoji884][emoji884][emoji884]


Sent from the Hoskey Hill country

 

[Mastermind]

If you plumb your air shocks to the back bumper, then you don't need to take the tire off to add air....

Air shocks?

Ain't nobody got time fo dat.

 

[Kiwioilboiler]

Great - there's the next catchphrase we will see, hundreds of times, in dozens of threads, over the coming months.

I'd probably move if that's the case.

 

[Dream]

Air shocks?

Ain't nobody got time fo dat.

When I seent the cinder blocks I was certain you wuz puttin in flapper bars and a Skyjacker shackle lift to make the 15 x 10 American classics and a pair of Cooper Cobra 315-85-15 white letter radials clear the fenders.
It needs the 1980s "rake".
From what I could see in the pic, the body and paint are freakin mint on that one.
Cleanass rig, even if its a Dudge.

 

[Dream]

I'd probably move if that's the case.

Hi Mark Adam.