Not So Pro 3

[Dream]

Changed a wire rope on a hoist today.
Not bad on these little guys. 5/16" diameter rope. 365' length.
Just put the lower block down, disconnect the mechanical limit switch to keep it from getting out of time, run the rope off, splice it to the new one, and pull the new one through the sheaves.
Connect the new one to the drum, bring it up to the point you marked and reconnect the mechanical limit, and done.
Then clean up all that greasy arse old rope.

 

[dall]

He he
View attachment 349256

Exactly
We knew how you are

Had a 2014 Dudge for a service truck a few years ago.
I didnt even know about the flippy mirror thing when I got it.
Was *b-wording to a fellow employee about how the mirrors didnt extend to see around the utility bed.
He smiled and flipped them up for me.
I'll say they worked well as they were intended to.
The passenger side one on this Chevanationazu keeps vibrating itself back in so I cant see chit on the curb side.
Little silicone caulking will probably fix that.

see your truck isn’t as gay as you are lol

 

[Mastermind]

Good evening gents.

 

[redline4]

Bed time.
Heading down to kill pines with @Woodrow and a bunch of other clowns in the morning.

 

[dall]

Damn slackers

 

[Woodrow]

Bed time.
Heading down to kill pines with @Woodrow and a bunch of other clowns in the morning.

Bedtime for me too. Got plenty to get ready for the maniacs arriving in the morning. We have about 150 pine trees to kill tomorrow. There will plenty to eat and we will have a little fun at the end of the day!

 

[full chizel]

Bedtime for me too. Got plenty to get ready for the maniacs arriving in the morning. We have about 150 pine trees to kill tomorrow. There will plenty to eat and we will have a little fun at the end of the day!

So 1 pine for each new saw you bought this year.

 

[Dream]

Exactly
We knew how you are
see your truck isn’t as gay as you are lol

Umm, I beg to differ slack master.
Been trying to get these cheapo mfers to buy decent work trucks for years.
They FINALLY started buying Ford's, and news flash, they see that maintenance costs suddenly went down.
Say whatever you want, but Ford makes a WORK TRUCK.
They do it better than anyone else IMO.
Youre just mad because the Ferds dont come with a built in dent puller mount in the seat base.

 

[hoskvarna]

@hoskvarna you get many chickens out there? I didn't find one last year.View attachment 349252

Driving around the national forest I noticed this bloom on an oak log I cut on last year. I was on a mission for ash firewood tonight but I'll be going back for these tomorrow. View attachment 349253 View attachment 349254
They aren't much by themselves, but they're great in breakfast scrambles or buttered with peppers and onions or ramp bulbs on a steak.

No I’ve not seen any of those up here


Sent from Hoskey Hills

 

[Dream]

Bedtime for me too. Got plenty to get ready for the maniacs arriving in the morning. We have about 150 pine trees to kill tomorrow. There will plenty to eat and we will have a little fun at the end of the day!

Sounds like a good time.
Taking the loader over and cleaning up a little bit for one of the boys friends at their new place.

 

[Kiwioilboiler]

Bed time.
Heading down to kill pines with @Woodrow and a bunch of other clowns in the morning.

taking the PeckerWood MoF026?

 

[Kiwioilboiler]

So it seems the daughters team lost her 3rd 4th playoff.
Her mum got given the team to coach after it was selected too, so now I'll have to listen to "this bïtch didn't do this, that bïtch didn't do that, the other bïtch didn't do the other thing and so on...."
Then one of them will go out of earshot and I'll get a completely different version.
What a life.

 

[dall]

Umm, I beg to differ slack master.
Been trying to get these cheapo mfers to buy decent work trucks for years.
They FINALLY started buying Ford's, and news flash, they see that maintenance costs suddenly went down.
Say whatever you want, but Ford makes a WORK TRUCK.
They do it better than anyone else IMO.
Youre just mad because the Ferds dont come with a built in dent puller mount in the seat base.

ford always had a dent puller as a seat belt

 

[Lnk]

Good morning, wife forgot to tell the dog not to wake early because it is the weekend. So the dog woke me up early. Coffee is brewing, going to get some chit done now that the heat has broken.

 

[redline4]

taking the PeckerWood MoF026?

@kurtz picked it up for me at Kevin's and is bringing it along for this adventure.
@Woodpecker says it enjoys a thorough teabagging.

 

[Mastermind]

So it seems the daughters team lost her 3rd 4th playoff.
Her mum got given the team to coach after it was selected too, so now I'll have to listen to "this bïtch didn't do this, that bïtch didn't do that, the other bïtch didn't do the other thing and so on...."
Then one of them will go out of earshot and I'll get a completely different version.
What a life.

Just nod and say ok.

 

[Mastermind]

Good morning fellas.

 

[Kiwioilboiler]

@kurtz picked it up for me at Kevin's and is bringing it along for this adventure.
@Woodpecker says it enjoys a thorough teabagging.

He, amongst others teabagged my 7900 at Kev's one year.
Kev's running a kinky operation up there.

 

[redline4]

Morning tea baggers and ball gaggers

Heading out shortly.

GFY if required.

 

[Woodrow]

Good morning fellas.