No one pulls more than you...and he doesnt pull any heavier than i do lol
I remember themIt is a swivel adapter with 1/2"-20 threads that connects either to the filter input or the throttle body input. Fuel line adapter. The tbi models don't have a fuel port to connect a fuel gage. I have a gage, just waiting on the adapter I ordered. View attachment 347784
lol I wish mine was further than that lolNever! I’m on 65 acres. Closest neighbors are about quarter mile from me.
According to the TBI brain trust, it is supposed to be between 9 and 14 psi, but they say 10 minimum, or you can get lean backfires back out the tbi, and rough running under load. Two issues I am experiencing. It may well be the distributor as well. But I like to know instead of shotgunning parts. Compression cold is 160 to 170 on all 8 cylinders. It is an '88. Timing is set to zero with that wire disconnected.I remember them
As long as it is spraying it should be good
They are just a electric regulated carb
Never! I’m on 65 acres. Closest neighbors are about quarter mile from me.
According to the TBI brain trust, it is supposed to be between 9 and 14 psi, but they say 10 minimum, or you can get lean backfires back out the tbi, and rough running under load. Two issues I am experiencing. It may well be the distributor as well. But I like to know instead of shotgunning parts. Compression cold is 160 to 170 on all 8 cylinders. It is an '88. Timing is set to zero with that wire disconnected.
I have replaced cap and rotor, plugs and wires as some of the boots broke when I pulled the plugs for the compression test. Plugs looked ok, but I had new ones, so. I do get a good cone of fuel on the throttle plate, and it idles pretty good at 650-675 rpm when warm. Want to like the truck, just haven't warmed up to it yet.
Went to see mom.Where are all the flappers?? Cutting firewood or fixing Dodges??
Right, Prolly washing tables, chairs, and momma hit list for weekend. Suck it up all you saw junkies!!
Bout three quarters of a mile from my place. As the crow fly’s. We had a strong wind from the south blowing. Pushed it away from us.Is that fire anywhere near you H-Bomb? I saw it took off out of Roseburg Lumber's yard and burned up a few homes near you.
Been living off a generator scene yesterday afternoon. Could use a nice hot shower and a shave right about now.Is that fire anywhere near you H-Bomb? I saw it took off out of Roseburg Lumber's yard and burned up a few homes near you.
lol you would be one of those carolina squatters lolBroke those front struts down. Whoever assembled them mixed up parts from two different model Rangers that aren't really compatible, but I have both of those models currently so I can put the shocks in the 2021 work one and the springs in my own 2012 if I choose.
Coil is interesting, tapered wind from 20mm for first six then down to 16mm for the top few. Supposed to be 50mm lift "comfort" version.
Struts are good too, my favourite brand because the lower coil seat comes with the ability to add packer rings to level the vehicle up without having to do a coil as well. That 10mm ring will be 20mm lift at the wheels.
Gotta get that nose high ay @Dream @dall
View attachment 347824 View attachment 347825 View attachment 347826
I sent you a video on social media. It’s building 17. It’s where the whole *s-wordshow started. Let me know if you got it.Is that fire anywhere near you H-Bomb? I saw it took off out of Roseburg Lumber's yard and burned up a few homes near you.