Not So Pro 3

[qurotro]

Morning everyone!

 

[Stump Shot]

Good morning.

 

[Dream]

Not something this guy is about to do. Likely one of the hooligans that left his empty vodka bottle or any of the empty joint wrappers at the turn around at the end of the road.

Probably Peg from Zip ties n bias plys got over your way bud.

 

[redline4]

If any of you bishes are feeling inadequate, this big red pecker extender will be out on the lot for sale.



Best get it before tomorrow and spend the weekend swimming in poon.

 

[dall]

Damn slackers

 

[dall]

If any of you bishes are feeling inadequate, this big red pecker extender will be out on the lot for sale.

View attachment 335682

Best get it before tomorrow and spend the weekend swimming in poon.

that your new one ??

 

[Kiwioilboiler]

If any of you bishes are feeling inadequate, this big red pecker extender will be out on the lot for sale.

View attachment 335682

Best get it before tomorrow and spend the weekend swimming in poon.

The alignment hoist? Keen as.

 

[redline4]

that your new one ??

Absolutely not.
Useless as a truck when the side of the box is about 6'.

The alignment hoist? Keen as.

Huh?

 

[full chizel]

If any of you bishes are feeling inadequate, this big red pecker extender will be out on the lot for sale.

View attachment 335682

Best get it before tomorrow and spend the weekend swimming in poon.

That one isn’t too bad if it was a little lower. Some really scream micro pecker

 

[USMC615]

Howdy goobers…heading to 92 today.

 

[dall]

Howdy goobers…heading to 92 today.

happy birthday

 

[USMC615]

happy birthday

Lol

 

[Kiwioilboiler]

Huh?

I was trying to joke that i had more interest in the Hunter hoist than the brodonkulated (TM Ed King 2022) pickup. It fell short of the mark obviously.

 

[Mastermind]

Just got off the phone with the machine shop dude. He recommended doing the full meal deal to the 460. His reasoning.....the dished pistons and those D3 heads are gonna be far too low on compression. He recommended flat top pistons, bored .030, .020 off the heads, three angle valve job, new cam bearings and freeze plugs. He gets a better deal on parts than I do.....

So I'll be taking it to him in a few days.

 

[Stump Shot]

Just got off the phone with the machine shop dude. He recommended doing the full meal deal to the 460. His reasoning.....the dished pistons and those D3 heads are gonna be far too low on compression. He recommended flat top pistons, bored .030, .020 off the heads, three angle valve job, new cam bearings and freeze plugs. He gets a better deal on parts than I do.....

So I'll be taking it to him in a few days.

Woof, you better check the lash on the ring and pinion. LOL

 

[timg]

Just got off the phone with the machine shop dude. He recommended doing the full meal deal to the 460. His reasoning.....the dished pistons and those D3 heads are gonna be far too low on compression. He recommended flat top pistons, bored .030, .020 off the heads, three angle valve job, new cam bearings and freeze plugs. He gets a better deal on parts than I do.....

So I'll be taking it to him in a few days.

If your builder agrees. Yinzers might want to check the Keith Black Flat Top Hypereutectic slugs. Have had good success with these. Not crazy expensive either.

 

[Kiwioilboiler]

Just got off the phone with the machine shop dude. He recommended doing the full meal deal to the 460. His reasoning.....the dished pistons and those D3 heads are gonna be far too low on compression. He recommended flat top pistons, bored .030, .020 off the heads, three angle valve job, new cam bearings and freeze plugs. He gets a better deal on parts than I do.....

So I'll be taking it to him in a few days.

How he know it needs 30 over via the phone?

 

[Mastermind]

If your builder agrees. Yinzers might want to check the Keith Black Flat Top Hypereutectic slugs. Have had good success with these. Not crazy expensive either.

Last build we used Speed Pro Hypereutectic slugs. Those seemed nice too. I'll let Walt choose the parts again on this one. The one thing I was insistent about was the timing set. Gotta be from Cloyes.

 

[Mastermind]

How he know it needs 30 over via the phone?

That's just a standard oversize. His reasoning was simple. If we are buying new pistons, it just made sense to start with a fresh bore.

 

[jacob j.]

Morning boys. Rains a coming! Desperately needed! Already had a small vegetation fire close by yesterday afternoon.

I was checking some of the reservoirs just north of you a couple weekends ago - There's some that need 25-30 inches more rain to be able to make it through the summer.

I think the fire scene in southern Oregon/northern California is going to be pretty ugly this summer.