Not So Pro 3

[p61 western]

Good morning fellas

 

[41FanForLife]

Any room for one more idiot in here? Asking for a friend...

 

[Kiwioilboiler]

Any room for one more idiot in here? Asking for a friend...

Yo bro!

 

[41FanForLife]

Yo bro!

How are you Adam? @PA Dan said you was checking in on me.

 

[full chizel]

Who is the new guy?

 

[Stump Shot]

Ok guys, I need a bit of help deciphering what wiring I need for a MS441c.
The wiring in it has been hacked on and I'm not sure what's all needed as this is the first one of these and M-trons I've had

View attachment 319617 View attachment 319618

I think I need callouts 13 and 14?
Right now there's a wire to the spade terminal at the coil, then a cobbled eyelet to a coil bolt and both of those go into the airbox. Obviously some wires go to the carb too, but not sure where it all ties together..
I'll try to get a pic of what's in the airbox when I go to work .

It's on a different IPL page, the anchor wire attaches to the handle thingy.

 

[Kiwioilboiler]

How are you Adam? @PA Dan said you was checking in on me.

Not so much checking on you as making sure i maximise my free couch sleep locations. Just in case you know.

 

[Stump Shot]

I don't understand the attachment to sports teams anymore than I understand the attachment to movie stars or political figures, but I absolutely understand what you just laid out.

Carry on.

That's an easy one, replace sports teams/players, movie stars and politicians with "chainsaw". You should see the madness clear as mud then.

 

[Stump Shot]

Good morning and welcome FNG @41FanForLife

 

[41FanForLife]

Who is the new guy?

Some asshat from the city of losers this week.

 

[cuinrearview]

Some asshat from the city of losers this week.

You're from Columbus?

 

[41FanForLife]

You're from Columbus?

Columbus is a pretty nice city

 

[Mastermind]

Thanks, will do.
Also, while I have you captive...
The throttle cable..
Where it connects to the carb, does it connect between the 2 ferrules or after the second? It was connected between the 2 and it will only open the throttle blade maybe 1/3 of the way..
The manual doesn't actually say..

After the second. The one on the end is to have something to grab.....

This saw is best taken apart and reassembled by installing everything on the jug and then installing that as a unit.

Any room for one more idiot in here? Asking for a friend...

Good morning stranger.

That's an easy one, replace sports teams/players, movie stars and politicians with "chainsaw". You should see the madness clear as mud then.

I don't really understand having an attachment to a single brand of anything either.

 

[41FanForLife]

Out in Las Vegas this week at the Carpenter's International Training Center for a ICRA Class. Time for some breakfast and find my classroom.

 

[USMC615]

Any room for one more idiot in here? Asking for a friend...

Last I heard, this dude's ol' lady had his ass shackled in the basement. Obviously he's been allowed a poast or two here...maybe he'll finish that damn deck he's been milkin' forever.

 

[41FanForLife]

After the second. The one on the end is to have something to grab.....

This saw is best taken apart and reassembled by installing everything on the jug and then installing that as a unit.



Good morning stranger.



I don't really understand having an attachment to a single brand of anything either.

Good morning Randy. How's things on the farm treating you.

 

[41FanForLife]

Last I heard, this dude's ol' lady had his ass shackled in the basement. Obviously he's been allowed a poast or two here...maybe he'll finish that damn deck he's been milkin' forever.

That Dude was going 7 days and in charge of 2 different millwork installs. The deck is done. So you can GFY BUB !!!

 

[cuinrearview]

Columbus is a pretty nice city

Sure, if you're from Cleveland.

 

[redline4]

After the second. The one on the end is to have something to grab.....

This saw is best taken apart and reassembled by installing everything on the jug and then installing that as a unit.



Good morning stranger.



I don't really understand having an attachment to a single brand of anything either.

Thanks much!

 

[USMC615]

That Dude was going 7 days and in charge of 2 different millwork installs. The deck is done. So you can GFY BUB !!!

Well then you have time to post da pics of said "done" deck...BUB!!!