Not So Pro 3

[Sagebrush33]

Ive had a 93 Flare side and 2 more 95s before this one.
Had 2 with 300 I6s and 5 speed Mazda transmissions.
2 with 302 V8s and auto trans.
1 each 6 cylinder 5 speed 4 x4 and 1 each V8 automatic.
6 cylinder 5 speed 4 x 4 by far the best all around truck. Not the fastest, but I knew I was gonna get there.
Eventually.

Love them 300s.
two 7.3ls here. Both autos.
one 460 with C6 auto.... my project truck. 96 6.7l 12v fummins with a ZF6.

 

[Dream]

lol i was meaning the ford lol
hows you slacker

LOL!

lol i was meaning the ford lol
hows you slacker

Its not a Chebby slacker.
You can actually DRIVE these under their own power.
You should try it sometime.
I know, your calf muscles wont be all jacked up from all that pushing, but you could get used to it.
I'm doin ok.
Hows Maddie?
When you flipping to nights?

 

[dall]

LOL!

Its not a Chebby slacker.
You can actually DRIVE these under their own power.
You should try it sometime.
I know, your calf muscles wont be all jacked up from all that pushing, but you could get used to it.
I'm doin ok.
Hows Maddie?
When you flipping to nights?

maddie is ok shes asleep on other end of the couch
go to nights tomorrow night 6 to 6 for a couple nights then 10s after

 

[Dream]

Love them 300s.
two 7.3ls here. Both autos.
one 460 with C6 auto.... my project truck. 96 6.7l 12v fummins with a ZF6.

Nice!
Dont spose I could interest you in a 98 1/2 first year 24 valve Comeapart?
Comes in a beat up shipping crate thats falling apart.

 

[Dream]

maddie is ok shes asleep on other end of the couch
go to nights tomorrow night 6 to 6 for a couple nights then 10s after

Sounds fun.
What they got you doin?
Much cut/grind/weld, or you getting to be a "consultant"?

 

[dall]

Sounds fun.
What they got you doin?
Much cut/grind/weld, or you getting to be a "consultant"?

tomorrow night is opening doors and pulling spacers from the reheat section
not sure exactly where ill be or what ill be doing after the weekend

 

[Kiwioilboiler]

his uncle jack

Pretty sure he got Jack off.

 

[Kiwioilboiler]

Sounds fun.
What they got you doin?
Much cut/grind/weld, or you getting to be a "consultant"?

Insultant?

 

[Sagebrush33]

Nice!
Dont spose I could interest you in a 98 1/2 first year 24 valve Comeapart?
Comes in a beat up shipping crate thats falling apart.

I'll keep it in mind. Dream.... bridge cranes and VP44 comeapart.
I'm actually pretty definite on porting the snot outa a 12v head to slap on a bored 6.7L

 

[dall]

Pretty sure he got Jack off.

lol

Insultant?

lol more likely

 

[Sagebrush33]

Pretty sure he got Jack off.

Now I know why yer sportin a hard hat.

 

[Sagebrush33]

BTW.
Whoda fawks Jack?

 

[Dream]

Insultant?

Correct. Thanks for fixing that.

 

[Dream]

Pretty sure he got Jack off.

 

[Sagebrush33]

You know Jack too?

 

[dall]

You know Jack too?

everyone knows jack but you helped him off

 

[Dream]

I'll keep it in mind. Dream.... bridge cranes and VP44 comeapart.
I'm actually pretty definite on porting the snot outa a 12v head to slap on a bored 6.7L

I'm pretty sure somebodys tried it already. Whats the youlube say?
Any gains from that?
Maffs aint my strong suit, but I aint sure you can flow any more air from the 2 big valves than you can from the 4 smaller ones.
Advantage might be in the pattern, swirlies and such.
There are scientifical terms for whut ah mean I'm sure.

 

[Sagebrush33]

everyone knows jack but you helped him off

Chiiit, everyone always tellin me, I don't know jack.

 

[Steve]

Aww, damn it. @Sagebrush33


How you fellas been?


Busy on this side of the fence!

 

[Dream]

You know Jack too?

Everbody knows Jack.
Jack Hoff.
Hes a popular guy.