Not So Pro 3

[hoskvarna]

Morning/evening fellars

Another day in paradise [emoji3061]


Sent from Hoskey hilltop

 

[Czed]

 

[Kiwioilboiler]

2.5L Optimax maintenance in U.S dollars.
NGK 5887 $12 each $72 total
96148A8 impeller kit with all o-rings and replacement cup $60
Quart mercury high performance lower unit oil $20
Mercury fuel filter $28
875284T01 oil filter $12
$192 total without leaving my chair. Sucks they hit you so hard on prices. You going to take to dealer for oil pump prime after changing filter or can you do that yourself?

Merc mechanic mate swears that because the oil filter is on the low pressure side that a pump prime should not be necessary?
Plugs were $30 ea from auto shop mate, dealer ones would've been $40...

 

[P.M.P.]

 

[Egg Shooter]

That's the spirit Mr Dirtê! Enthusiasm over Experience!

 

[timg]

Morning boater extraordinaire' s, saw kings, snipe, sea gull hunters, and blue collar stiffs. Hope you have a gooder one. This short week is almost ended thankfully.

 

[Only the Tony]

Merc mechanic mate swears that because the oil filter is on the low pressure side that a pump prime should not be necessary?
Plugs were $30 ea from auto shop mate, dealer ones would've been $40...
View attachment 308245

Wonder what it cost for shipping for you. This is what $60 gets you on the impeller kit. I don't know on the oil prime. Most people say if you open the lines do a prime.

 

[GCJenks204]

Morning / Evening All.

Lots of media talk locally about Tennessee and North Carolina this morning. Apparently a somewhat local called in a couple os swatting incidents at some school down there. Hopefully the media down there doesn’t think we’re all *a-holes.

Cool 42f with a little low fog this morning.

 

[dall]

View attachment 308247

yes

 

[Woodrow]

Good morning fellas!

 

[Stump Shot]

Evening knuckle humpers.
Did a little more cleaning up on the 262 extra peas.
I'm thinking crank seals were a lot of the problem. Flywheel side looks pooched. Bearing doesnt look great either. Think both will get replaced.
Still have to figure out how the oiler pump and drive gear comes off.
Anyhoo, enough saw tinkering. Its about nighty night time.

If you are replacing the crank bearings, you can just push it off with the bearings and seals all in one shot.
HL Supply offers an adapter for a puller for sale, or one can be made from a 3/4" x 1/2"? pipe reducer.
Fashion a driver from a 1/2" or so piece of pipe heat gear and tap on.

 

[Stump Shot]

Good morning.

 

[ray benson]

Good Morning. 57°F/ 14°C going up to 73°F/ 23°C. Really dry, need to water the yard again.

 

[farminkarman]

Good morning.

Good morning Steve! How's it going today?

 

[USMC615]

How my nephew's buddy stacks wood. View attachment 308223

All I see is 52 card pick up x 10 waiting to happen!

 

[USMC615]

Morning firewood stackers…72 to 86 and clear.

 

[dall]

All I see is 52 card pick up x 10 waiting to happen!

when you move there you can show him the right way of doing it

 

[USMC615]

when you move there you can show him the right way of doing it

I’d rather take my chances with the Phillipino hag than *f-wordk with that stackin’ mess!

 

[Mastermind]

Good fapping morning peeps.

 

[JoeDirt]

I’m sure they understand you have to take care of work first lol

Work now, gfy later.