Not So Pro 3

[Dream]

We have screens all over the plant, but a bigger one like that will probably be replacing a call light bank like this.View attachment 306549If left alone I would probably retire before this system does, but you can't pack as much useless information onto one of these and the desk jockeys up front or at home can't access it without coming out to the floor.

I see you have at least one Gorbel work station crane there. The blue thingy in the background.

 

[Czed]

Good afternoon guy's

 

[p61 western]

Good afternoon fellas

 

[cuinrearview]

I see you have at least one Gorbel work station crane there. The blue thingy in the background.

We just use the rail the balancers run down that we hook into when we have to work up top. I'll try and get you some crane pics one day Brent. We got a ton of the mfers in here.

 

[markds2]

We just use the rail the balancers run down that we hook into when we have to work up top. I'll try and get you some crane pics one day Brent. We got a ton of the mfers in here.View attachment 306556

What do you manufacture there Tim?

 

[cuinrearview]

What do you manufacture there Tim?

Mainly cores. Heater, evaporator, radiator, and condenser. We have around a dozen HVAC assembly lines as well.

 

[Czed]

A friend is supposed to get me access to look at 15-20 big vintage Mac
Partners and Joneses as he calls jonsereds chainsaws
An elderly woman has them in a basement
He said they looked good didn't see any white death.
He worked on her house
And told her he'd try to find
Someone to look at them.
He has to set up a visit
Or a shooting would happen most likely.

 

[dall]

damn slackers

 

[41FanForLife]

Skated the raindrops all the way home on the scooter today. Lasagna time then work on cabinet doors

 

[timg]

Big machines are cool to look at. But it makes a long day up down, and around. Hot, tired, and hungry. Dang.

 

[41FanForLife]

Big machines are cool to look at. But it makes a long day up down, and around. Hot, tired, and hungry. Dang.View attachment 306558 View attachment 306559 View attachment 306560

Whatcha do? Tire rotation and front end alignment?

 

[cuinrearview]

@Dream these are probably the largest in the plant. Injection molding area. The dies in the stamping area might be heavier but they're not physically as large. I have not worked with injection molding machines or stamping presses. Yet.

 

[timg]

Little tweak of the kanuttie valve. I don't do tires LOL. Headed back tomorrow. You have a good day John??

 

[41FanForLife]

Little tweak of the kanuttie valve. I don't do tires LOL. Headed back tomorrow. You have a good day John??

Yes sir. Worked with the bosses little brother. He is a outlaw fan. We had plenty to talk about. LOL

 

[timg]

Sir????? Ya ain't talking to the bosses little brother now. Ha, Ha

 

[Kiwioilboiler]

Morena E Hoa's
Randy not flooded. Mark still droughted. Tough crowd.

Keep safe ay.

 

[sawmikaze]

I got this out of the garbage, I had to wire it and put new bulbs in it ... I didn't expect it work.

 

[Kiwioilboiler]

We don't price shop here. Dollars to donuts they paid LG/Samsung money for these.

We have screens all over the plant, but a bigger one like that will probably be replacing a call light bank like this.View attachment 306549If left alone I would probably retire before this system does, but you can't pack as much useless information onto one of these and the desk jockeys up front or at home can't access it without coming out to the floor.

You sure you don't work for RefiningNZ? We seem to have perfected replacing perfectly functional gear with overpriced inferior stuff that subsequently needs more money spent because "your's is a unique situation"...no wonder we're going under.

Mainly cores. Heater, evaporator, radiator, and condenser. We have around a dozen HVAC assembly lines as well.

Intercoolers?? Asking for a friend named Mike and Mark and Gunner and Adam and Dallas and...

@Dream these are probably the largest in the plant. Injection molding area. The dies in the stamping area might be heavier but they're not physically as large. I have not worked with injection molding machines or stamping presses. Yet.View attachment 306561

You went to a lot of trouble to take a pic of a co-workers ass there Timoti. What's he doing down there anyway...

 

[Mastermind]

On my way to R&R a microwave. GFYs

 

[Kiwioilboiler]

View attachment 306565

I got this out of the garbage, I had to wire it and put new bulbs in it ... I didn't expect it work.

I googled Ryan. Mean score!