Not So Pro 3

[Lightning Performance]

Seent that meself.

Rep cause at least it stood up, looked pretty good and sounded good.

 

[PA Dan]

You taking a full day off on Tuesday for Lernerville??
Did @PA Dan bust out the 346 toy today?? It sure looks good!! But it was a dead soldier when I saw it. He calls it his problem Ha Ha!!

No just the Stihls! The 200t got a good workout along with the 461! I did make a few cuts with the 371 but was too beat to do any more!

 

[Kiwioilboiler]

Crane Man Brent @Dream and other working men. So everyone.
Have a look at this evaluation of an incident from Garyland.

 

[timg]

No just the Stihls! The 200t got a good workout along with the 461! I did make a few cuts with the 371 but was too beat to do any more!

Yes, You boys dealt with some heat again today. Thought John would of bought that little white climber today. That's a money saw As he says!!

 

[hoskvarna]

Finally got the shaft out of gearbox
Me thinks premature bearing failure

Sent from Hoskey hilltop

 

[Kiwioilboiler]

GoodView attachment 302434
Evening guy's

Is that a biscuit, a fry bread or a scone Dave?

Just spread 22,940 cu. Liter of mulch and some change

I see what you did there Tim. Welcome aboard.

 

[Lightning Performance]

Finally got the shaft out of gearbox
Me thinks premature bearing failure

Sent from Hoskey hilltop

 

[Lightning Performance]

Hey Todd, Doing well buddy. Just spread 22,940 cu. Liter of mulch and some change. You know how us guys like to round things off LOL!! Now time to move into the pool. Is this time a Monday off to work day for you!? Better get some breakfast dude. Have a goodin Todd!!

But but.... do you measure your dick in centimeters or inches?
And... do round up to the next whole number lol

Yes, You boys dealt with some heat again today. Thought John would of bought that little white climber today. That's a money saw As he says!!

Bread & Butter Bish

 

[timg]

Is that a biscuit, a fry bread or a scone Dave?


I see what you did there Tim. Welcome aboard.

I like metrics Adam. I'm kinda committed to using the system across the board in torque values, weights, pressures, and sizing and volume because of Komatsu and my work. I learned alone time ago 03937 thousands equals 1 mm. LOL!!

 

[dall]

No just the Stihls! The 200t got a good workout along with the 461! I did make a few cuts with the 371 but was too beat to do any more!

because of the weight ?

 

[Czed]

Is that a biscuit, a fry bread or a scone Dave?


I see what you did there Tim. Welcome aboard.

Wtf is a scone?

 

[Egg Shooter]

Got any air filter pics?

Umm no. Its gone. But ask @RI Chevy they are his specialty.

 

[timg]

But but.... do you measure your dick in centimeters or inches?
And... do round up to the next whole number lol

Bread & Butter Bish

Kenny the only tool I gotz for that is a go//no go gauge tool. Unfortunately as you get older like me you will find the no go side of the gauge tool to your fit. LOL!!
There ain't no rounding offs on that gauge anymore.

 

[timg]

But but.... do you measure your dick in centimeters or inches?
And... do round up to the next whole number lol

Bread & Butter Bish

Kenny the only tool I gotz for that is a go//no go gauge tool. Unfortunately as you get older like me you will find the no go side of the gauge tool to your fit. LOL!!
There ain't no rounding offs on that gauge anymore.

 

[RI Chevy]

Umm no. Its gone. But ask @RI Chevy they are his specialty.

Nah. Not mine pal.
Ask one of your buddies. I bet they have them.

 

[Kiwioilboiler]

I like metrics Adam. I'm kinda committed to using the system across the board in torque values, weights, pressures, and sizing and volume because of Komatsu and my work. I learned alone time ago 03937 thousands equals 1 mm. LOL!!

And ultimately that's the point ay Tim. Work on metric gear, think metric.

 

[Lightning Performance]

Wtf is a scone?

Lol

 

[Kiwioilboiler]

Wtf is a scone?

https://en.wikipedia.org/wiki/Scone

 

[Egg Shooter]

I put a couple of 302's/C4 in a couple of 78's 4dr chit brown winners.
One got a cam kit and some beat-up bent ass "new" headers lol. The rear made that car go 4.56's 8.8?... or something near that with 3K stall in da trans. I bet on it many times to win and lose. I built it for my neighbor to street race in Philly, school parking lot beater and dirt roads.

Basically the same architecture as the same era mustang if I recall. Fox body

 

[41FanForLife]

Just Thursdays action. And some of Fridays between the rain calls. Bout you??Was Kyle Larson impressive?

I didnt see the second race yesterday