Kiwioilboiler
346 Pic Examiner
- Local time
- 7:51 PM
- User ID
- 12322
- Joined
- Apr 20, 2020
- Messages
- 9,796
- Reaction score
- 64,691
- Location
- Marsden Pt, NZ

Doesn't look very wintery there either Boss.
Doesn't look very wintery there either Boss.
Gonna take a couple more days to get this fence row cleaned out.
Dammit.
gaining more hay
Doesn't look very wintery there either Boss.
nope
would that be considered as rental pig ?Mmmm swine!!!!
Hard for me to comprehend how you can have snow and ice one day and then only a few days later be 20C. I mean its not much hotter here right now (27C).Was nearly 70° here today....just lovely weather.
Blue Shoat perhaps...Mmmm swine!!!!
Was struggling to get above 10°f here just a week ago. It was 47°f here today at lunch.Hard for me to comprehend how you can have snow and ice one day and then only a few days later be 20C. I mean its not much hotter here right now (27C).
Death to meMmmm swine!!!!
The idea is to force the flame up to the pan at the back of the stove. No idea if it will work or not yet as the side exit for the chimney isn't ideal. Pretty similar concept as having flu pans in a commercial syrup evaporator. I had trouble sourcing a 6" flange that was flat and not flimsy or ridiculously priced. The one that came with the barrel stove kit is curved and meant to go on the top side of the barrel. As you can see there is no room for that with the pan.So for the dummies in the room (me), why the labyrinth for the smoke path to the chimney Brad @Woodpecker ?
would that be considered as rental pig ?
Hard for me to comprehend how you can have snow and ice one day and then only a few days later be 20C. I mean its not much hotter here right now (27C).
The idea is to force the flame up to the pan at the back of the stove. No idea if it will work or not yet as the side exit for the chimney isn't ideal. Pretty similar concept as having flu pans in a commercial syrup evaporator. I had trouble sourcing a 6" flange that was flat and not flimsy or ridiculously priced. The one that came with the barrel stove kit is curved and meant to go on the top side of the barrel. As you can see there is no room for that with the pan.
was 26 here at 8 am this morning and almost 70 by 1 todayYeah....he ain't gonna keep it.
Huge temperature swings are very common here in Tennessee.
Could you not get an adjustable elbow and make it a 45° turn? I seem to remember those being available. That would have made the flange closer to the top.
But I think it will draw fine where it is.