Not So Pro 3

[Kiwioilboiler]

Tee post....

View attachment 280451

Ok. So here they would tractor ram a round pressure 5inch treated post in with a banger every 12 ft or so. Then 2" battens about every 3 feet to keep the wire spread apart. A tee post is a flash post. Not a strainer, and not a batten.

 

[Mastermind]

How many times did you hit your finger and hate the world? Every time I have a hand injury, everything makes it a priority to hit it

Yesterday I smashed it with a tee post. Just about pissed myself.

Ok. So here they would tractor ram a round pressure 5inch treated post in with a banger every 12 ft or so. Then 2" battens about every 3 feet to keep the wire spread apart. A tee post is a flash post. Not a strainer, and not a batten.

Lots of people do similar things here. This fence is quick and cheap on leased land.

 

[p61 western]

Way too far behind to read it all. Had a great day, but way too many people out. Good evening fellas.

 

[dall]

Way too far behind to read it all. Had a great day, but way too many people out. Good evening fellas.View attachment 280454 View attachment 280455 View attachment 280456 View attachment 280457

how close to your house slacker

 

[Lightning Performance]

Ebnin
Hot soup taste good

Out grabbing up dead white oak pencils today. Thing's is bone dry out there. Set a log on fire with crumbs on it. Time for a dual port on that saw. Snow is a coming

 

[Kiwioilboiler]

How'd it go @p61 western ? Any changes to engineer into it during the body swap?

 

[P.M.P.]

Ebnin
Hot soup taste good

Out grabbing up dead white oak pencils today. Thing's is bone dry out there. Set a log on fire with crumbs on it. Time for a dual port on that saw. Snow is a coming

What saw?

 

[Lightning Performance]

How'd it go @p61 western ? Any changes to engineer into it during the body swap?

Morning Adam

 

[Lightning Performance]

What saw?

362V1 no screen.

 

[Kiwioilboiler]

Morning Adam

Yo.

 

[P.M.P.]

362V1 no screen.

 

[p61 western]

how close to your house slacker

30 minutes. Sup Slack King?

 

[p61 western]

How'd it go @p61 western ? Any changes to engineer into it during the body swap?

Nope not really. The steel wheels got to go though. The bead don't hold for chit when aired down.

 

[P.M.P.]

Nope not really. The steel wheels got to go though. The bead don't hold for chit when aired down.

You got a on board compressor Mike?

 

[dall]

30 minutes. Sup Slack King?

lol just watching tv hows you slacker

 

[Lightning Performance]

Mine is not ported, yet.
No base gasket, enlarged exit hole, timing bump, and just casting flash removed and port matched at the muffler. Intake is dropped a few degrees. The rest is factory.

Going to work over the Mtron saw maybe in the next month or two.

 

[P.M.P.]

Mine is not ported, yet.
No base gasket, enlarged exit hole, timing bump, and just casting flash removed and port matched at the muffler. Intake is dropped a few degrees. The rest is factory.

Going to work over the Mtron saw maybe in the next month or two.

Heard there AWESOME

 

[Lightning Performance]

Heard there AWESOMEView attachment 280461

I'm go grab some more wood and a drink. Then it's nap time till 3

Looking like all snow here this time... maybe up to a foot.
Been cold here of late.

Whatcha doin?

 

[p61 western]

You got a on board compressor Mike?

No just a heavy duty portable one. Might do on board air though.

 

[p61 western]

lol just watching tv hows you slacker

Tired holding down the couch now lol.