Not So Pro 3

[Slumberjack]

Slow at work, waiting for FedEx to get here with my timing chains.
Made a dog for my 357 out of an old McCulloch one.View attachment 279936 View attachment 279937 View attachment 279938

The spikes I made for my 357. I really like yours too!

 

[Kiwioilboiler]

Morning lads.
20c going to 30.
No wind, outgoing tide.
#daddydaycare be a fishing lesson today.

 

[dall]

Morning lads.
20c going to 30.
No wind, outgoing tide.
#daddydaycare be a fishing lesson today.
View attachment 279949

whats the string on handrail for ?

 

[Kiwioilboiler]

Slow at work, waiting for FedEx to get here with my timing chains.
Made a dog for my 357 out of an old McCulloch one.View attachment 279936 View attachment 279937 View attachment 279938

Looks good Ed. I add a 372 roller to the bottom leg and remove the OEM alloy right angle chain catcher on as many of my 346/350 and 357/359 chassis saws as possible. Helps steady em and they clear noodles better.

 

[Kiwioilboiler]

whats the string on handrail for ?

Stops birds landing and *s-wordting all over it.

 

[p61 western]

Good afternoon fellas.

 

[redline4]

whats the string on handrail for ?

Stops birds landing and *s-wordting all over it.

Should have answered claymore tripwire for home invaders.

 

[Kiwioilboiler]

Good afternoon fellas.

Mike your Hilux 4Runner Surf project sent me trawling back thru my pics. May 2016. The ole 94KZN130. 3.0TD. Split the ATF cooler out of the radiator and went atf2air. Top mount intercooler. Engine oil cooler with RX7 core. HiFlo turbo. Cut slot in front bumper. Added variable resistor pot to diesel pump. Tried three different rads and waterpumps and it still got hot with a load despite passing every headgasket test known.
Removed the towbar and sold it.

 

[redline4]

Good afternoon fellas.

Sup Mike?
Still snowing over there?
Saw some stuff on the news about mudslides and other nasty crap happening in your hood.

 

[p61 western]

Mike your Hilux 4Runner Surf project sent me trawling back thru my pics. May 2016. The ole 94KZN130. 3.0TD. Split the ATF cooler out of the radiator and went atf2air. Top mount intercooler. Engine oil cooler with RX7 core. HiFlo turbo. Cut slot in front bumper. Added variable resistor pot to diesel pump. Tried three different rads and waterpumps and it still got hot with a load despite passing every headgasket test known.
Removed the towbar and sold it.
View attachment 279957

That's badass. Do you have more pictures of it?

 

[p61 western]

Sup Mike?
Still snowing over there?
Saw some stuff on the news about mudslides and other nasty crap happening in your hood.

Off and on snow. The mudslide stuff is way south of where I'm at. The snow isn't melting anytime soon lol. Sup with you Ed?

 

[redline4]

Off and on snow. The mudslide stuff is way south of where I'm at. The snow isn't melting anytime soon lol. Sup with you Ed?

Not much.
Waste of a day here. FedEx has yet to show up with my needed parts. They are supposed to be here between 10-11am.
Finally getting to see the sun every once in a while.

 

[Lightning Performance]

I might need a Snickers

View attachment 279919

Thats a rather large and intrusive dent puller you have there.

Damn that's a big mandrel you have there!

Hello hand-humpers.
Got called in early this morning.
Lots of hurry up and now a lot of waiting.
Seems to be cooling off a little down here.

Welcome to New Jersey... hurry up and wait.

but he’s running the bus that’s full of us window lickers

Sit down and put your helmet back on... like usual.

Slow at work, waiting for FedEx to get here with my timing chains.
Made a dog for my 357 out of an old McCulloch one.View attachment 279936 View attachment 279937 View attachment 279938

Nice

Last spring I took a couple saws to the woods. The 357 knew it was going to get more work done, so it rested up ahead of time.View attachment 279942

Carpet for the firewood... a true lumberjack.

Mines usually a tailgate or stump. Sometimes I'm lucky and they are even dry...

2'x3' peice of plywood

English?

Gfy

Morning lads.
20c going to 30.
No wind, outgoing tide.
#daddydaycare be a fishing lesson today.
View attachment 279949

Nice view

 

[Kiwioilboiler]

That's badass. Do you have more pictures of it?

Not much to see Mike. LandCruiser neg20 rims and 31s. Work-of-art split dump pipe. Anal retentive temp and boost monitoring station...
There's some ugly boost control and fuel-cut defeat pics too, but I'm too embarrassed to share those.

 

[Kiwioilboiler]

Nice view

Thanks. Yeah we are unlikely To Move.

 

[Lightning Performance]

Must say these old Canadian saws are just nice. They still fire up and run like new every time. This one was sitting among the Americans, Germans and the Swedish flavors
Possibly a few others
Need to run like ten saws a week for a month just get the fuel through them again. Just ran three and got to cut with one. Storage fuel is low so it's time for a trip to the airport.

PP455

 

[p61 western]

Not much to see Mike. LandCruiser neg20 rims and 31s. Work-of-art split dump pipe. Anal retentive temp and boost monitoring station...
There's some ugly boost control and fuel-cut defeat pics too, but I'm too embarrassed to share those.View attachment 279963 View attachment 279964 View attachment 279965 View attachment 279966

I like it very cool 4runner for sure. Too bad you didn't keep it, and fix the cooling issue.

 

[Mastermind]

Slow at work, waiting for FedEx to get here with my timing chains.
Made a dog for my 357 out of an old McCulloch one.View attachment 279936 View attachment 279937 View attachment 279938

Damn nice work Ed.

 

[redline4]

Damn nice work Ed.

Thanks Randy!

 

[dall]

I might need a Snickers




Damn that's a big mandrel you have there!

Welcome to New Jersey... hurry up and wait.

Sit down and put your helmet back on... like usual.

Nice

Carpet for the firewood... a true lumberjack.

2'x3' peice of plywood

Gfy


Nice view

maybe later