Not So Pro 3

[nbbt]

Morning folks.

 

[Lnk]

True DJ, I'm doomed.
It wasn't really meant to be like this, has new, crankcase, top end, xpg handle and rear element, top and starter cover. All the intake parts are standard with me, if crank, I'm afraid I'll end up with oil pump, clutch and drum...

The project is a crank bearing experiment.
To have one that can be abused, I should get another project with the same bearing solution.

Frequent annual inspections prevent this.

 

[Loony661]

Frequent annual inspections prevent this.

They would be better with Intelligent Carburetors for dumb people.

At least that’s what I read on the internet.

 

[GCJenks204]

Morning All. Couple more days a slacking, the back to the office to slack on Thursday.

 

[Wonkydonkey]

Good afternoon guys

@LAWN BOY your needed to help fix a Honda running lean
I think it needs to be fixed like this….

Btw I like to watch video's

 

[3browns]

Morning men, 20 F, clear and windy

Headed north today but coffee first

 

[beaglebriar]

Going to haul in some brand new, still under warranty stuff?
Because why get it fixed for free when you can dump your own money into it.

Listen bub I know you think I’m just some kid but I’m 48 and I know stuff…

 

[beaglebriar]

Morning All. Couple more days a slacking, the back to the office to slack on Thursday.

Same here Gary. I’ve been staying plenty busy around the house but I’m almost looking forward to going back to work.

 

[GCJenks204]

Same here Gary. I’ve been staying plenty busy around the house but I’m almost looking forward to going back to work.

I’ll actually be pretty busy Thursday and Friday closing out some calendar year end business. Only have those days and then travel starts again on Monday. Would have preferred the whole week off but Texas is calling earlier than usual.

 

[Stump Shot]

Good morning, @dall take your meds.

 

[Wonkydonkey]

Good afternoon guys

@LAWN BOY your needed to help fix a Honda running lean
I think it needs to be fixed like this….
View attachment 444823
Btw I like to watch video's

@LAWN BOY this thread,

Thread 'Brand New Honda Mower Runs Lean'

Sunday at 7:05 PM

I posted this in the chainsaw section by mistake. Sorry.

Model Number HRN216VYA

I didn't take a picture of the mower because it pretty much looks identical to the factory picture below.

Mower runs beautiful until the choke pulls off. It as one of those thermowax chokes.

I've had the brand new carb off for cleaning and I sprayed all the ports that the service manual says to do. The carb is CLEAN.

Mower runs fine with the blade engaged. It only runs lean at fast idle after the choke pulls off.

Idle mixture needle is already set to the far left at the limiter stop.

The...

• Merkava_4

• 
• 

Listen bub I know you think I’m just some kid but I’m 48 and I know stuff…

Oi listen ear bub….

 

[dall]

Listen bub I know you think I’m just some kid but I’m 48 and I know stuff…

How to pick your nose with tongue and how to pee in your own butt ?

@LAWN BOY this thread,

Thread 'Brand New Honda Mower Runs Lean'

Sunday at 7:05 PM

I posted this in the chainsaw section by mistake. Sorry.

Model Number HRN216VYA

I didn't take a picture of the mower because it pretty much looks identical to the factory picture below.

Mower runs beautiful until the choke pulls off. It as one of those thermowax chokes.

I've had the brand new carb off for cleaning and I sprayed all the ports that the service manual says to do. The carb is CLEAN.

Mower runs fine with the blade engaged. It only runs lean at fast idle after the choke pulls off.

Idle mixture needle is already set to the far left at the limiter stop.

The...

• Merkava_4

• 
• 

Oi listen ear bub….
View attachment 444828

Better call the pro in
Wrong thread

 

[Kiwioilboiler]

Morena E Hoas.
I've been off work for 7 days now, and for 7 days the wind has been enough or more to keep my boat on the trailer.
I'm not enjoying not moving.

Kee safe ay.

 

[dall]

Morena E Hoas.
I've been off work for 7 days now, and for 7 days the wind has been enough or more to keep my boat on the trailer.
I'm not enjoying not moving.

Kee safe ay.

You chose to stay there

 

[Lnk]

Morena E Hoas.
I've been off work for 7 days now, and for 7 days the wind has been enough or more to keep my boat on the trailer.
I'm not enjoying not moving.

Kee safe ay.

Not a sail boat then?

 

[dall]

Not a sail boat then?

powered by ford lol

 

[Lnk]

powered by ford lol

As opposed to the Chevy guy that drives a GMC

 

[dall]

As opposed to the Chevy guy that arrives a GMCView attachment 444841

lol atleast its same color

 

[John Wargo]

Well they still put studs up 16" on center. I wasn't lost.

 

[redline4]

Well they still put studs up 16" on center. I wasn't lost.

Your phone number still on the wall in the portacrapper?