Not So Pro 3

[redline4]

Well it was a good morning until the better half hit a deer, she's all good though that's all that matters to me.View attachment 264769View attachment 264770

That sucks.

 

[Stihl working Hard]

How's it going todd
After adding 6% sales tax and converting
It to AUD they're practically giving it away it's only
3824.13 AUD
It's a bargain todd.

I wonder what it would be downunder if I walked into a gun shop and asked what there price would be bloody scary comes to mind

 

[Stihl working Hard]

Good Morning. 45°F/ 7°C going up to 50°F/ 10°C

Good morning Ray I trust your week is going well

 

[Stihl working Hard]

Good afternoon sir, 5:00am start. Have a good evening find a cold beer would ya?

No problems doing that my friend

 

[Stihl working Hard]

Morning All. Brisk morning walk this morning.

View attachment 264757 View attachment 264758

Morning Gary great pics as usual

 

[Stihl working Hard]

Good morning fellas.

How’s your day going today Mike

 

[Stihl working Hard]

Good morning fellas

Good morning Brett

 

[Stihl working Hard]

Closed. The 351C....or maybe the 400C had open chambers, but never a Windsor.

I personally never had a Windsor always the 351 Cleveland was always under the impression from mechanics that they were a stronger engine,was I misled on this

 

[Stihl working Hard]

Thanks Hot Rod.
Pretty sure this is a small buck. Light is still really low here.
View attachment 264762

Like lambs to the slaughter great spot you have there Ed

 

[Stihl working Hard]

Top of the day fellas!

Right back at ya Tim

 

[cuinrearview]

I personally never had a Windsor always the 351 Cleveland was always under the impression from mechanics that they were a stronger engine,was I misled on this

The original 351 Clevelands, small block with big closed heads, were runners. The 351 and 400 modified Clevelands, big block pattern with open heads, were turds from the factory.

 

[Stump Shot]

Page 880!

 

[Stihl working Hard]

The original 351 Clevelands, small block with big closed heads, were runners. The 351 and 400 modified Clevelands, big block pattern with open heads, were turds from the factory.

So closed chamber heads were better than open chamber.I hope so because I only had closed.

 

[Stihl working Hard]

Page 880!
View attachment 264779

Cmon Steve I half expected to see a ms880

 

[Stump Shot]

Cmon Steve I half expected to see a ms880

I didn't have a picture of one, had to make do...

 

[Mastermind]

I personally never had a Windsor always the 351 Cleveland was always under the impression from mechanics that they were a stronger engine,was I misled on this

It all depends on what you want out of it. The Cleveland is a performer at high rpm, but lacks torque at lower speeds.

The original 351 Clevelands, small block with big closed heads, were runners. The 351 and 400 modified Clevelands, big block pattern with open heads, were turds from the factory.

And the open chamber head engines were bad for detonation. The quench area was loose and velocity was poor.

With domed pistons, and the right camshaft, they became a different animal.

To me, a 351C with 2V heads and a 4V intake made to fit those heads were good street engines. The 4V heads had huge intake ports that were horrible at anything under 3500 rpm.

So closed chamber heads were better than open chamber.I hope so because I only had closed.

All relative to what the intended use of the engine is.

 

[p61 western]

How’s your day going today Mike

Doing pretty good. The sun's about to come up now. How was your day Todd.

 

[Stihl working Hard]

Doing pretty good. The sun's about to come up now. How was your day Todd.

Not bad tomorrow weather hot humid and in the 90ssummer is just around the corner

 

[Stihl working Hard]

Friday tomorrow Iam going to hit the fart sack

 

[Hinerman]

Pg 881