- Local time
- 9:45 AM
- User ID
- 2584
- Joined
- Feb 4, 2017
- Messages
- 6,955
- Reaction score
- 47,262
- Location
- Winona County, MN

Good morning gang. 26 now, high of 34 later. Wife says roads were a skating rink on her way to work and she spun out going 35 mph, but corrected it and made it.
Spent yesterday trying to repair a small linkage in my skidder that very important. The Forward/Reverse lever linkage came apart at the transfer case. Threads stripped out allowing an eyelet to pull out of the shift shaft that goes inside the case. Anyway, attempted to drill the shift shaft to install a roll pin, but that was no-go. Shaft was industrial chromed on the outside and also case hardened. Had to call a mobile welder to come tack it into place to keep me going. Anyway, should be back at it today after I button a couple things up.
Spent yesterday trying to repair a small linkage in my skidder that very important. The Forward/Reverse lever linkage came apart at the transfer case. Threads stripped out allowing an eyelet to pull out of the shift shaft that goes inside the case. Anyway, attempted to drill the shift shaft to install a roll pin, but that was no-go. Shaft was industrial chromed on the outside and also case hardened. Had to call a mobile welder to come tack it into place to keep me going. Anyway, should be back at it today after I button a couple things up.