Not So Pro 3

[Slumberjack]

Try blocking off about 3/8” of the intake side of the lowers with JB weld next time and see how it does

That area I marked?

 

[Mastermind]

To build a faster velocity into the fingers?

Forget the fingers. They don't do much except on big displacement engines. 3120s work good with them. What Kevin is talking about is increasing velocity.....period. Find a way to take away case volume rather than add any more. Like stuffers.

 

[huskihl]

I don’t comprestan all I comprestan wif what you’re saying.

To build a faster velocity into the fingers?

Kinda like the opposite of hogging out the lowers. Fill them instead. I don’t know if it’s a velocity thing or a capacity thing. The Chinese ones usually have way too much blow down, and by the time you raise the uppers way up they don’t run for *s-word. Filling the transfer tract might help

 

[huskihl]

View attachment 304006 That area I marked?

Yeah. Hard to do with fingers and bridges in there though

 

[Slumberjack]

Forget the fingers. They don't do much except on big displacement engines. 3120s work good with them. What Kevin is talking about is increasing velocity.....period. Find a way to take away case volume rather than add any more. Like stuffers.

Ah gotcha cool! Thanks for the coaching

 

[Slumberjack]

Kinda like the opposite of hogging out the lowers. Fill them instead. I don’t know if it’s a velocity thing or a capacity thing. The Chinese ones usually have way too much blow down, and by the time you raise the uppers way up they don’t run for *s-word. Filling the transfer tract might help

Yes indeed everything is timing stupid on this one lol. Thank you for the help fellas

 

[huskihl]

View attachment 304006 That area I marked?

More like this

 

[Mastermind]

I was using bridge ports on two port motors just to change the direction of the charge a little. Seemed to add a little bit. But I realized that if the heights of the ports were just right, they weren't needed. Then I started trying to get my machine work to set my transfer heights so I didn't need to mess with the uppers as much. Made a better runner with less work.

 

[Slumberjack]

More like this

View attachment 304007

Ah and no fingers lol

 

[Slumberjack]

I was using bridge ports on two port motors just to change the direction of the charge a little. Seemed to add a little bit. But I realized that if the heights of the ports were just right, they weren't needed. Then I started trying to get my machine work to set my transfer heights so I didn't need to mess with the uppers as much. Made a better runner with less work.

Awesome thought process!

 

[huskihl]

Sometimes an 066 will flat out haul ass with big lower windows, and sometimes they suck. I don’t really have them figured out yet but it seems to have something to do with the stock port timing. Hang onto the ones that have an exhaust at 100 and 19° bd

 

[Slumberjack]

Sometimes an 066 will flat out haul ass with big lower windows, and sometimes they suck. I don’t really have them figured out yet but it seems to have something to do with the stock port timing. Hang onto the ones that have an exhaust at 100 and 19° bd

Screenshot on dat!

 

[Kiwioilboiler]

What does it mean if someone is username (deleted)?
Did they get booted or just time out?

 

[Wonkydonkey]

Morning slackers

 

[Czed]

Good morning guy's
Stopped at my friends place to shoot his plate rack last night
Arthritis is really getting his hands and wrists
His revolver's and wood stocked centerfire rifles are getting to much for him.
He really liked the trigger on the tx .22 the smith m&p .22 trigger was a bit to heavy for him.
Found a sticker for a chusky I leave at my nephew's
He couldn't get it started last winter
Said the compression was too much?
Turns out he didn't know about the decomp
I told him I'd stack base gaskets to lower the compression
But I lied.
He can man up and start it
Put a new 24" bar and chain on it.
I gave him a dolmar 115 he uses all the time.

 

[Stihl working Hard]

I prefer them. Easier to start after they have sat. That's important for me. Pulling away on a saw while it draws fuel back up to the carb is a major culprit it making things worse for me pain wise with this whole neck *s-worde. It's why I'm getting rid of most if my vintage saws. In fact @Dream is getting one real soon. Its the worst of the group for being a bear to start.

Fair call

 

[Stihl working Hard]

Went for breakfast with the kid to the Cafe she works at.

View attachment 303898

Nice spread there Ed

 

[Stihl working Hard]

Good morning guy'sView attachment 304013
Stopped at my friends place to shoot his plate rack last night View attachment 304014
Arthritis is really getting his hands and wrists
His revolver's and wood stocked centerfire rifles are getting to much for him.
He really liked the trigger on the tx .22 the smith m&p .22 trigger was a bit to heavy for him.View attachment 304015
Found a sticker for a chusky I leave at my nephew's View attachment 304016
He couldn't get it started last winter
Said the compression was too much?
Turns out he didn't know about the decomp
I told him I'd stack base gaskets to lower the compression
But I lied.
He can man up and start it
Put a new 24" bar and chain on it.
I gave him a dolmar 115 he uses all the time.

Good morning Dave hope your weekend is going well great pics buddy

 

[Stihl working Hard]

Good morning OPE hope everyone’s weekend is going well

 

[Dream]

Morning weiner-wranglers!
More fun wif cranes today. Hope to get this thing wrapped up and head back norf.
Y'all dont pull it too hard.