PAST Northern MI GTG September 10-11

[cuinrearview]

 

[SCHallenger]

Good thing you reminded me. They had completely slipped my mind. I've been busier than a one- toothed man in a corn on the cob eating contest!

Bump. All this talk about food reminded me of "Mikey's Fantastic Ribs!" Anybody know if we are going to have them this year?

 

[cuinrearview]

Has anyone else noticed that @Fifelaker looks like Jim Lahey and @leadfarmer kinda resembles Cyrus?
They both like guns too.

 

[Fifelaker]

Has anyone else noticed that @Fifelaker looks like Jim Lahey and @leadfarmer kinda resembles Cyrus?View attachment 306134
They both like guns too.

Guns jz like sawz thayz scary

 

[P.M.P.]

 

[davidwyby]

 

[Woodpecker]

View attachment 306367

guess the bird?


Rare amphibious blue footed wood pecker… whut did eye win?

 

[davidwyby]

guess the bird?


Rare amphibious blue footed wood pecker… whut did eye win?

Looks like a snipe to me! But I didn’t have my sniper rifle…

 

[cuinrearview]

@huskihl I think we have our guy. I'll have him there sometime Thursday. What is the soup menu?

 

[Stump Shot]

@huskihl I think we have our guy. I'll have him there sometime Thursday. What is the soup menu?

Make sure you have enough paper bags and flashlights.

 

[Red97]

I am not going to be attending this year.

We are expecting our daughter to arrive early October. Best that I say close to home until she arrives.

Going to miss a great time, with good food and great people. Y'all wave as you drive by.

 

[davidwyby]

I am not going to be attending this year.

We are expecting our daughter to arrive early October. Best that I say close to home until she arrives.

Going to miss a great time, with good food and great people. Y'all wave as you drive by.

Congrats, ain’t gonna fault you for that, but bummer!

 

[Redfin]

Make sure you have enough paper bags and fleshlights.

Repaired.

 

[Fifelaker]

Repaired.

 

[Egg Shooter]

I am not going to be attending this year.

We are expecting our daughter to arrive early October. Best that I say close to home until she arrives.

Going to miss a great time, with good food and great people. Y'all wave as you drive by.

Congratulations bud.

 

[SCHallenger]

I am not going to be attending this year.

We are expecting our daughter to arrive early October. Best that I say close to home until she arrives.

Going to miss a great time, with good food and great people. Y'all wave as you drive by.

Sorry we'll miss seeing you this year, Joe, but congrats on the expected "arrival!" Maybe I'll run into you around Leslie.

 

[Egg Shooter]

Some of you may know, some not. I ported my first saw over summer with some tutoring from Kevin and Steve. I'm bringing this POS to Kevin's to conduct an oil test. Amsoil Dominator @ 70 or 80:1. I'll mix there. I would like people to burn up the two gallons of fuel Im going to bring. This was a free to me saw. I rebuilt it and ported it strictly as a learning tool. I don't want to try and blow it up but won't be upset in the least if it does. As you know I have had 4 neck surgeries now and its too heavy for me to run much so I'm calling on y'all for the "opportunity" to run the *s-worde out of it. All I ask is keep her tuned crisp and chain sharp. So, what ratio? I'm leaning towards 70:1. The saw after I hacked on it in links below. 46cc clammy homo lite consumer grade saw.
This is after the rebuild and port. Still was breaking in on 40:1 Husqvarna XP+ oil here.

https://www.dropbox.com/s/6duqgpq736eatvm/VID_20210415_103901458~3.mp4?dl=0

https://www.dropbox.com/s/rcr7utcpy5qk6hj/VID_20210325_120124467 (1)~2.mp4?dl=0

 

[lehman live edge slab]

Some of you may know, some not. I ported my first saw over summer with some tutoring from Kevin and Steve. I'm bringing this POS to Kevin's to conduct an oil test. Amsoil Dominator @ 70 or 80:1. I'll mix there. I would like people to burn up the two gallons of fuel Im going to bring. This was a free to me saw. I rebuilt it and ported it strictly as a learning tool. I don't want to try and blow it up but won't be upset in the least if it does. As you know I have had 4 neck surgeries now and its too heavy for me to run much so I'm calling on y'all for the "opportunity" to run the *s-worde out of it. All I ask is keep her tuned crisp and chain sharp. So, what ratio? I'm leaning towards 70:1. The saw after I hacked on it. 46cc clammy homo lite consumer grade saw.
This is after the rebuild and port. Still was breaking in on 40:1 Husqvarna XP+ oil here.

https://www.dropbox.com/s/6duqgpq736eatvm/VID_20210415_103901458~3.mp4?dl=0

https://www.dropbox.com/s/rcr7utcpy5qk6hj/VID_20210325_120124467 (1)~2.mp4?dl=0

Thing cuts pretty good actually, my vote is 80:1 they claim up to 100:1 is safe on saber and it’s not as good as dominator. My prediction is no issues after the 2 gallons at 80:1

 

[Egg Shooter]

Thing cuts pretty good actually, my vote is 80:1 they claim up to 100:1 is safe on saber and it’s not as good as dominator. My prediction is no issues after the 2 gallons at 80:1

Imma get an exhaust side pic b4 bringing it up. There was some very slight cylinder scuffing on the exhaust side before the rebuild. It had a partially stuck ring. I also never ran it stock and healthy. My buddy that gave it to me and, had had it for years, about shat himself when he ran it after I Iron horsed it. lol. He said that mfer has never ran like that. Between Steve and Kevins help and some luck on my end it runs pretty good. Those vids are in 16" seasoned cherry with an 18" .325 chain.

 

[Stump Shot]

Imma get an exhaust side pic b4 bringing it up. There was some very slight cylinder scuffing on the exhaust side before the rebuild. It had a partially stuck ring. I also never ran it stock and healthy. My buddy that gave it to me and, had had it for years, about shat himself when he ran it after I Iron horsed it. lol. He said that mfer has never ran like that. Between Steve and Kevins help and some luck on my end it runs pretty good. Those vids are in 16" seasoned cherry with an 18" .325 chain.

Must have been @huskihl as I don't recall telling you to I-hose anything.