SOLD MS361 project saw

[Woodslasher]

Long story short I started this build awhile ago and lost interest. The saw should be 100% except for the carburetor. I started converting it to an 044 carb, got it to run once and then it refused to stay running several days later. I haven't touched it since, so it may just be a tuning issue. I don't feel like diagnosing and fixing it, hence the "project saw" title

New oem parts on the saw are all new gaskets/seals, crank bearings, fuel line, impulse hose (for 044 boot conversion), wide discharge clutch cover + spikes, coil, and a few misc smalls. I installed a new Meteor piston when I had it apart and a good used 044 intake boot. The muffler is an a/m muffler with a 2nd port I added, it'll also come with an umolested a/m muffler. It also has a USA brand (I think) FULL WRAP, not the oem 3/4 wrap. It'll also come with a factory 1/2 wrap and a few other misc smalls for it. It had some chain rash on the bar pad that's been welded, so structurally 110% but it looks a little rough. I included a picture of the welded area.

I'm not really sure how to price this with the wrap, $400 + the ride seems like an okay start, but feel free to make an offer or tell me if I'm outta line.

 

[Woodslasher]

 

[jacktheripper]

does the max flow filter just bolt right up on a 361? I’ve never seen or ran a 361

 

[Woodslasher]

does the max flow filter just bolt right up on a 361? I’ve never seen or ran a 361

Almost a direct bolt on. I had to rasp a ~1/4 deep crescent out of the bottom lip of the filter cage for it to clear the intake horn, but everything else fits without modifications. Pic of the work below:

 

[jacktheripper]

Almost a direct bolt on. I had to rasp a ~1/4 deep crescent out of the bottom lip of the filter cage for it to clear the intake horn, but everything else fits without modifications. Pic of the work below:

That’s pretty sweet. I like the setup for the type of wood that we have around here in the national forest: thickly wooded lodgepole pine forest with wood that isn’t often past 20” diameter. A saw like this would be perfect for the timber sale loggers. I set up my 034 Super for that type of stuff. I just wish it could run a max flow.

 

[Woodslasher]

Yep, a wrapped 60cc saw with a longer light bar is exactly what I had in mind with this, but life coupled with me owning a perfectly fine 562 has changed my plans. I've already got more saws than I really need, and this guy is the last one that isn't either sentimental or a favorite user.

 

[BonScott46]

Coolest 361 ever.

 

[Woodslasher]

Sold