FOUND IT Makita/Dolmar 6400/7900 stuff

[Steve]

Im looking for a full wrap handle, a muffler cat or no cat, and a piston and cylinder for a 7900/7910. New or good used. Let me know what you have.

 

[Rob Stafari]

Don't have any used wares to part with myself. Nate( @fordf150 ) at Performance Outdoor Equipment usually has all that in stock should you choose to go that route. He's been busy transitioning to his new shop building so I'd look up the number and give him a call if you're in a hurry.

 

[Steve]

Don't have any used wares to part with myself. Nate( @fordf150 ) at Performance Outdoor Equipment usually has all that in stock should you choose to go that route. He's been busy transitioning to his new shop building so I'd look up the number and give him a call if you're in a hurry.

Yep, i gonna hit up Nate for some stuff if i can't find anything through the rest of us good folk.

 

[Warped5]

Steve, @Black Dog Chainsaw may be able to help you out ...

 

[ajschainsaws]

@Steve how urgent do you need em

 

[Steve]

@Steve how urgent do you need em

Yesterday Andrew! lol!

What you got and how much?

 

[Steve]

Steve, @Black Dog Chainsaw may be able to help you out ...

Thanks Ted!

 

[Wilhelm]

Sondre @SOS Ridgerider had a good source for a OEM 52mm P&C kit, I can't recall the shops name though.

Nate and Andrew are great to deal with, can't go wrong utilizing their help!

 

[SOS Ridgerider]

Sondre @SOS Ridgerider had a good source for a OEM 52mm P&C kit, I can't recall the shops name though.

Nate and Andrew are great to deal with, can't go wrong utilizing their help!

Hey guys.

This is the oem 7900 cylinder with the decomp on the recoil side and the newer 7910 piston:

https://sleequipment.com/makita-genuine-part-038-130-070-cylinder-piston-cpl-dcs7901.html

 

[Steve]

Hey guys.

This is the oem 7900 cylinder with the decomp on the recoil side and the newer 7910 piston:

https://sleequipment.com/makita-genuine-part-038-130-070-cylinder-piston-cpl-dcs7901.html

Is there an advantage to the older cylinder?

 

[huskihl]

Is there an advantage to the older cylinder?

It has the decomp on the left. Newer ones have it on the right, so the decomp hole in the cylinder cover wouldn’t line up

 

[Steve]

It has the decomp on the left. Newer ones have it on the right, so the decomp hole in the cylinder cover wouldn’t line up

So one doesn't run any better stock than the other? 7900 vs 7910.

 

[huskihl]

So one doesn't run any better stock than the other? 7900 vs 7910.

I don’t think so. I’ve never done a direct comparison though.

 

[SOS Ridgerider]

Is there an advantage to the older cylinder?

Like Kevin said, I don’t think there’s any difference in how they run. The piston is the same as in a 7910, which was the big change they made.
The 7910 cylinder also has the cutout in the exhaust port to accommodate the SLR that protrudes into the exhaust port on the cylinder. Other than that it seems to be the same.

If you have the old red, grey or gloss black top cover this is a direct fit for the decomp button. The newer matte black top cover has the decomp cutout in a different place. Not that a $25 top cover should dictate what top end you buy, but just an FYI.
The decomp itself is also different between the two different top ends. Different lengths.

 

[Wilhelm]

One can always go with a brandy new red top which has a non drilled left hand DeCo hole . . .

 

[Steve]

One can always go with a brandy new red top which has a non drilled left hand DeCo hole . . .

View attachment 206122 View attachment 206124 View attachment 206125 View attachment 206126 View attachment 206127

But my saw is blue!

 

[Wilhelm]

Not if You give her a red hat!

 

[Steve]

So i ordered the cylinder kit, full wrap, and spike kit from SLE. The full wrap was only $102!



Still need a muffler.

 

[buckin-wood]

One can always go with a brandy new red top which has a non drilled left hand DeCo hole . . .

View attachment 206122 View attachment 206124 View attachment 206125 View attachment 206126 View attachment 206127

These are makita parts? Do you have part numbers for those covers? How close does the color match dolmar ?

 

[dahmer]