K095 bar in 3/8LP?

[AlexStromberg]

Like the title says, is there a bar like that from any of the major brands? I'd like to try it on my 55 or 238/242.


Have a good saturday night!

 

[davidwyby]

Ebay kevlargaffs hot rod kit

 

[davidwyby]

I have a 24"

Piltz 20 inch 7 Tooth HOT ROD KIT Conversion Kit fits, Husqvarna 55 | eBay

 

[davidwyby]

I think stihl 23rs pro .325 NK is faster

 

[AlexStromberg]

I have a 24"

Piltz 20 inch 7 Tooth HOT ROD KIT Conversion Kit fits, Husqvarna 55 | eBay

20" is never needed here. Thought maybe a 15" bar.

With shipping and customs that bar will cost like 400 bucks

 

[ajschainsaws]

If you looked up Dolmar ps-420 EA095 3/8 Lo Pro 16” 64DL
You then get a K095 bar and drill the oil hole on the EA095 bar
And that’ll fit the saws you talked about

or you can get the Oregon or husqvarna Nano .325 .043 very narrow kerf
Which will out cut the 3/8 it’s suitable for up too 60cc saws

 

[AlexStromberg]

If you looked up Dolmar ps-420 EA095 3/8 Lo Pro 16” 64DL
You then get a K095 bar and drill the oil hole on the EA095 bar
And that’ll fit the saws you talked about

or you can get the Oregon or husqvarna Nano .325 .043 very narrow kerf
Which will out cut the 3/8 it’s suitable for up too 60cc saws

Thats a possibility. The 325 mini chain doesnt work with normal 325 sprockets.

 

[Shane¹]

Windsor mini tips come in .325, 3/8 and 3/8 lp could try all 3 with this one bar

 

[Shane¹]

If you get this bar I am pretty sure I have a 3/8 and 3/8lp tips

 

[Woodwater]

German Dealer, there are K095 Sugi Hara LW 3/8 Low Profile

https://www.premium-motorsaegenzubehoer.de/home/sugihara-schienen/dolmar-husqvarna-jonsered-k095/

 

[ajschainsaws]

Thats a possibility. The 325 mini chain doesnt work with normal 325 sprockets.

Yes you need the conversion kits and over here there only available for the
STIHL ms-201 and husqvarna t540 at the moment

yes the sugihara is available in 3/8 lo pro k095 14” 16” 18”

 

[AlexStromberg]

Yes you need the conversion kits and over here there only available for the
STIHL ms-201 and husqvarna t540 at the moment

yes the sugihara is available in 3/8 lo pro k095 14” 16” 18”

Yes and the saws in question is a 55 and 242?