FOUND IT Jonsered stihl bar adapter

[unionvillecountryboy]

Have a jonsered 2188, I'd like an adapter for a stihl bar

 

[stihl livin]

@Homelite410

 

[unionvillecountryboy]

While on the subject, what length bar balances well? A 36" Oregon is really nose heavy... and the whole thing makes my back sore thinking about it haha

 

[mdavlee]

36" reduced weight for sale on here will be a lot less nose heavy. 28-32" is better on those

 

[unionvillecountryboy]

Anyone with an adapter? I see some on eBay, prefer to know it came from here.

 

[Icepick69]

Anyone with an adapter? I see some on eBay, prefer to know it came from here.

Apsbarshop.com has them

 

[Icepick69]

Anyone with an adapter? I see some on eBay, prefer to know it came from here.

Navigate under accessories, clinck on adaptor plates . Guess me need to fix that.

 

[unionvillecountryboy]

Navigate under accessories, clinck on adaptor plates . Guess me need to fix that.

Is the jonsered the small or large husky mount (8 or 9mm I'm not sure if that's correct?)

 

[Icepick69]

Is the jonsered the small or large husky mount (8 or 9mm I'm not sure if that's correct?)

You will need the h1 to s1

 

[unionvillecountryboy]

You will need the h1 to s1

Is that the same as the husqvarna 390? I want the adapter, but also want to know if it's considered the "large" mount

 

[Icepick69]

The 2188 and 390 is the Husqvarna large mount.

 

[Homelite410]

I have the adapter you need. 12.00 shipped. I make them.

 

[Homelite410]

@Homelite410

Yup thanks.

 

[Homelite410]

How many would you like?

 

[stihl livin]

Yup thanks.

Your welcome. Just trying to repay you one sale at a time.

 

[jockeydeuce]

How many would you like?

Would you ship to Canada?

 

[Homelite410]

Would you ship to Canada?

I do, however I like buyer to pay the ride across the border.

 

[unionvillecountryboy]

Is it common to need to drill the stihl bar tensioner hole for a jred?

I started to do it on an old bar.... but it's hard stuff.

 

[psuiewalsh]

If you have a dremel get a small carbide tool. you don't have to remove much from the tensioner hole.

http://www.ebay.com/itm/SOLID-CARBI...196655?hash=item569394e6ef:g:dbYAAOSwEetV8I8y

 

[mdavlee]

Is it common to need to drill the stihl bar tensioner hole for a jred?

I started to do it on an old bar.... but it's hard stuff.

Yes.