WANTED ISO: 359 Top cover, 056 parts, 038 tank

[jacktheripper]

Looking for 359 top cover!

Also looking for 056 super cylinder and piston, front handle (full wrap?) carb box cover, and air filter. I have other 056 parts to trade if you need.

Also looking for an 038 tank/handle

 

[HusqvarnaDave]

What condition? I have some with patina, or I've found new OEM at Duke's

 

[jacktheripper]

What condition? I have some with patina, or I've found new OEM at Duke's

A bit of patina shouldn’t matter. Just don’t want anything melted or cracked

 

[jacktheripper]

Bump

 

[Definitive Dave]

I have a “few” boxes of 056 stuffs.
Also a progressive IPL/SM research volume. Which size top end do you need?
I currently have a NOS/NIB 056m2 top end at Wiseco as reference for my piston design.
Dave

 

[Woodslasher]

I have a “few” boxes of 056 stuffs.
Also a progressive IPL/SM research volume. Which size top end do you need?
I currently have a NOS/NIB 056m2 top end at Wiseco as reference for my piston design.
Dave

I think the Super is the 54mm variant, according to my flawed memory. At the bare minimum it's the largest displacement "small-pattern" top end, so hard to go wrong with that.

 

[K Mueller]

I have a 54mm cylinder and wrap. The cylinder has a tiny bit of transfer but will clean up easy and be like new. Wrap handle isn’t pretty but functional. Unfortunately someone cut a portion of the rubber and was using in vice.

 

[jacktheripper]

Nice! I actually acquired a 54mm jug, but I’d be interested in that wrap handle. I have a ton of stuff to trade if you want to go that route.

 

[Definitive Dave]

I’m slow but found a couple 056 bits
Only 1 of the 54mm top ends and it’s rough but would clean up fine.
Box of NOS parts including crankcase and flywheel.
Bin of good parts both nos and used.
Bin -box of M2 top ends.

 

[jacktheripper]

View attachment 484354View attachment 484355View attachment 484356I’m slow but found a couple 056 bits
Only 1 of the 54mm top ends and it’s rough but would clean up fine.
Box of NOS parts including crankcase and flywheel.
Bin of good parts both nos and used.
Bin -box of M2 top ends.

Well that’s a bit of parts lol. I’m still looking for a carb box cover, air filter, 54mm piston and rings, and rear handle cover plate.

 

[HumBurner]

You still need a 359 top cover?

 

[jacktheripper]

You still need a 359 top cover?

Found that one! Thanks though!