SOLD Husqvarna 359

[GoBigBlue1984]

Selling a 359. Nice and clean saw. Wrap handle. Aftermarket muffler that I split in half on the EDM wire. Cut the cat out on the mill and tig’d the muffler back together and installed a 288 deflector. I’ve run 2 tanks through it and I like it. OEM cylinder and meteor piston/caber ring. 199 modified carb.
Is missing a top cover clip (rear above recoil). I can get one and install before shipping.

PHO $325 plus shipping

 

[Lightning Performance]

Selling a 359. Nice and clean saw. Wrap handle. Aftermarket muffler that I split in half on the EDM wire. Cut the cat out on the mill and tig’d the muffler back together and installed a 288 deflector. I’ve run 2 tanks through it and I like it. OEM cylinder and meteor piston/caber ring. 199 modified carb.
Is missing a top cover clip (rear above recoil). I can get one and install before shipping.

PHO $325 plus shipping

View attachment 143241 View attachment 143242 View attachment 143243 View attachment 143244

Trades?
I want to try one of these and then port it if it likes me.

 

[chipper1]

I like me some 359's .
GLWS

 

[GoBigBlue1984]

Really looking to move some saws Kenny. I’ve got too much stuff. Not a whole lot I’m looking for. There are a few things though.

 

[GoBigBlue1984]

I like me some 359's .
GLWS

359’s can be bad little mofo’s as you already know Brett

 

[Lightning Performance]

Just watched your video. That will be fine. Any defects or issues not listed in your add? Just asking.

I offer an Echo CS670 runs and drives fine. The chain brake is wonky but I can have a peek if you like. It is bone stock. It can be modded if you prefer. I brought it to the TN GTG last year. Be warned, it has a manual and auxiliary thumb oil pump. Says a 27" bar is max length. Don't try a 28" just too much for it ;-)

Edit: the best one saw plan ever imo

 

[GoBigBlue1984]

No Kenny, no defects or issues not listed in the add. I generally do not operate that way.

 

[Lightning Performance]

Me neither. Sorry if your offended. Are you interested in any trades? I have other saws to.

 

[GoBigBlue1984]

No offense taken Kenny. You coming to Randy’s in a week?

 

[jacob j.]

Nice work Brett - that motor sounds great!

 

[Lightning Performance]

No offense taken Kenny. You coming to Randy’s in a week?

Yes. I want to make a list this weekend of out going stuff like Dave does and just bring that stuff for other folks.

I need very small parts for 660's and 460 air flanges and carb studs. Forgot to order a few worm gears and other parts I busted up messing with 1122 oil pumps. I have two complete 1122's going for now and the 066 is done barring another starter mishap. No decomp. New bar and chain is hanging on a nail waiting for the rain to stop tomorrow

The list will be long and mostly turn key offerings.

 

[Cat 525]

Really great looking saw!

 

[Lightning Performance]

If you sell it quick there will be another one along shortly. This one is clean and you went over it. That means a lot to me as a buyer.

 

[GoBigBlue1984]

Kenny, what do you need 066/660 parts wise?

 

[GoBigBlue1984]

Nice work Brett - that motor sounds great!

Thank you JJ.

 

[GoBigBlue1984]

I need to add that this saw is setup with a 3/8-7 rim sprocket.