WANTED husqvarna 2100 parts

[roger collins]

does anyone have a complete 2100 recoil starter assembly? i also need the recoil pulley assembly(# 501200903)

 

[Jay Hansen]

does anyone have a complete 2100 recoil starter assembly? i also need the recoil pulley assembly(# 501200903)

Does your flywheel have two pawls or three? 2100s came both ways and took different pulleys.

 

[roger collins]

Does your flywheel have two pawls or three? 2100s came both ways and took different pulleys.

you are correct three pawls

 

[Sloughfoot]

Where was this when I was looking for a muffler and starter a year ago?

Vintage Husqvarna Chainsaw Parts, 2100 1100 Starter, Mufflers, Clutches | eBay

This lot consists of the 2 mufflers, the starter, and used clutches. The starter recoil is in good working condition. One of the mufflers has a dent on the backside. The clutches were in the box with the rest of the stuff. I believe that they are for the husvarna models above, but I'm not 100...

www.ebay.com

 

[hacskaroly]

Where was this when I was looking for a muffler and starter a year ago?

The good stuff never seems to be there when you are looking for it....

 

[Sloughfoot]

The good stuff never seems to be there when you are looking for it....

Ain't that the truth. I'll have a 5 year plan if I ever build a saw from scratch again. Not 6 months.

 

[hacskaroly]

Ain't that the truth. I'll have a 5 year plan if I ever build a saw from scratch again. Not 6 months.

It's taken me almost two years to get my 2100 running from sourcing necessary parts without paying humongous amounts. It's not perfect, but it runs!

 

[roger collins]

parts for the 2100 are becoming harder to find

 

[Stump Shot]

parts for the 2100 are becoming harder to find

I found this...

 

[hacskaroly]

I found this...

Oh wow, I wonder what the major differences are between the 1100 and the 2100, besides the 1 and 2. Very cool!

 

[Woodwackr]

I have a nos recoil, complete, as well as nos pulleys.
Replace the decal on Steve’s and you’d have a very nice used one

 

[av8or3]

this was just gifted to me. I’m going to fix it up for a friend of mine in the tree business.

 

[hacskaroly]

this was just gifted to me. I’m going to fix it up for a friend of mine in the tree business.

That looks like a fun project, lucky that it appears to have all the parts!

Edit: Can I be your friend too??

 

[Sloughfoot]

It's taken me almost two years to get my 2100 running from sourcing necessary parts without paying humongous amounts. It's not perfect, but it runs!

Mine's about 90% done after a year. It'll probably never be more than 95% unless certain parts fall out of the sky.

 

[hacskaroly]

Mine's about 90% done after a year. It'll probably never be more than 95% unless certain parts fall out of the sky.

Yeah, after getting it to run I found that the chain tensioner was not original and did not fit....so that should be the final piece I will need...then I can tear it all down and repaint it

 

[nv656]

Mine's about 90% done after a year. It'll probably never be more than 95% unless certain parts fall out of the sky.

What do you have left

 

[Jusgunn3]

Getting ready to give mine a tune up with new AV’s and fuel and oil lines. Have a 42” bar otw for her as well, have some square ground chain to run on the new bar. I do not think I have extra parts but I can take a look.

 

[Sloughfoot]

What do you have left

Little head scratcher and nitpicky stuff. Mystery bar oil leak. Possible tiny, intermittent air leak. Stripped factory cylinder bolt head. Would like to have OEM brake and filter cover. It runs, just isn't tip top.

 

[hacskaroly]

filter cover

Not OEM, but will cover your saw until you can find one, I dropped an uni-filter on my saw so I would not have to worry about putting a filter cover on.

 

[Sloughfoot]

Yeah, after getting it to run I found that the chain tensioner was not original and did not fit....so that should be the final piece I will need...then I can tear it all down and repaint it

Got a chain tensioner you can have.