FOUND IT Husqvarna 1100 Recoil Cover

[Warped5]

I don't need anything but the cover. If the ferrule is in there, that's ok.

Unsure as to which other covers will swap in ... this one takes the thick plastic air shroud under it, not the thin metal one like a 2100.

Not needing a beauty queen, either ....

Thanks!

 

[Eccentric]

What happened to the 1100?

Sorry I haven't returned your call yet. Been a rough/busy week. Gotta work Saturday, so I'll either ring you on the way in or will call Sun or Mon when I'm off if that's OK.

 

[Warped5]

Area around the bottom screw hole broke off when I was starting it yesterday. May have already been cracked. Not happy about it. May have to rig up a temp fix with some bent up washers or something.

OK on the phone call. Will be cutting/splitting today, so Sunday/Monday is probably the better option.

 

[jacob j.]

Ted- which ignition does your saw have?

 

[Warped5]

Here you go, JJ .... no discernable marks on the flywheel. No further way of knowing here unless I pull the flywheel.

 

[bplust]

Looks like Femsa.

 

[jockeydeuce]

I don't think FEMSA. ...Bosch, I believe.

 

[Morningman]

Here's a cover all holes good

 

[jacob j.]

I don't think FEMSA. ...Bosch, I believe.

Yep, FEMSA uses the three-pawl flywheel I believe. The two-pawl is typically Bosch. That's why the starters are different thicknesses.

 

[Warped5]

Here's a cover all holes good

Unfortunately, that's not the right one. It has the rope ferrule fully enclosed by the cover material and is for a three-pawl flywheel.

 

[Morningman]

Inside

 

[Warped5]

Here's the one off my saw. Note how the recoil spool is for two pawls and the exposed rope ferrule ....

 

[jacob j.]

I founded a replacement in good shape...

 

[Warped5]

PM sent ..