redline4
I'm huge in Japan
- Local time
- 7:11 PM
- User ID
- 5593
- Joined
- Mar 12, 2018
- Messages
- 11,597
- Reaction score
- 95,139
- Location
- Rosholt Wisconsin
Older Husqvarna 61.
I got it with a crushed handle, but it still started with ease.
I robbed the tank off my mostly chinese 268 to keep it mostly oem.
It has new a/mkt. av mounts, fuel line and filter.
I also has an a/m muffler, but the original will go with it.
Brake works, oils great.
I put in a Caber ring, base gasket deleted.
I have a Hyway seal/gasket kit and an oem oil pump o-ring that will go with it if buyer wants them.
Plastics are a bit dingy/faded and front of the top cover is a bit boogered, possibly melted from muffler.
The spur on it is ready to be replaced. The clutch functions fine, but the shoes look like they have a "step" to them.
So, may need a clutch and needs a drum.
OPEN TO OFFERS/ TRADES!
Would work trades on Stihl, Tsumura or sugi bar to fit my current 036 build, 20-24" range.
I already have a J-red 630, and working on an 036, so I will never use this.
More pics to come.
I got it with a crushed handle, but it still started with ease.
I robbed the tank off my mostly chinese 268 to keep it mostly oem.
It has new a/mkt. av mounts, fuel line and filter.
I also has an a/m muffler, but the original will go with it.
Brake works, oils great.
I put in a Caber ring, base gasket deleted.
I have a Hyway seal/gasket kit and an oem oil pump o-ring that will go with it if buyer wants them.
Plastics are a bit dingy/faded and front of the top cover is a bit boogered, possibly melted from muffler.
The spur on it is ready to be replaced. The clutch functions fine, but the shoes look like they have a "step" to them.
So, may need a clutch and needs a drum.
OPEN TO OFFERS/ TRADES!
Would work trades on Stihl, Tsumura or sugi bar to fit my current 036 build, 20-24" range.
I already have a J-red 630, and working on an 036, so I will never use this.
More pics to come.
Last edited:
