HMMMM OOOPS

[deye223]

So I took my plugs out so I could give them a comp test and well yeah I was surprised at the 261 .
The 460 is no surprise that it is rich as it likes to tune at 14800rpm but the hard wood here I like to run it at 13600 to 13800rpm , now the 261 it tunes at 14200rpm and runs an 18" 3/8 chain 36RM if tuned any fater than this i really have to lean on it to stop it burbleing.

MS 460


MS 261


Cheers D

 

[Deets066]

Oil thread

 

[Deets066]

 

[deye223]

Oil thread

Did you read my Sig .......

I use Mobil 2T ...... piston and jug look fine .

 

[Deets066]

Did you read my Sig .......

I use Mobil 2T ...... piston and jug look fine .

I like Mobil oil, I run it at 32:1 also

 

[deye223]

It's getting very hard to get I like it because it has bugger all stink and it doesn't make my eyes water in confined spaces .

 

[deye223]

This stuff ......

 

[RI Chevy]

261 mtronic or regular carb?

 

[Wonkydonkey]

@deye223 that 261 plug is interesting, rich and hot-ish Have you advanced the timing.. if so how much..?

Cheers

 

[deye223]

261 mtronic or regular carb?

Reg carb from back in about 2013.
It was the 1st 261 that Randy did ......

@deye223 that 261 plug is interesting, rich and hot-ish Have you advanced the timing.. if so how much..?

Cheers

I will have to pull the starter as we can't remember it was 6 odd years ago I think it might be as it will bite if you pull on it like a pussy ......

 

[Moparmyway]

The oil is not whats causing those deposits

 

[huskyboy]

The oil is not whats causing those deposits

Fuel?

 

[Moparmyway]

Fuel?

Fuel quality and quantity

 

[Wonkydonkey]

After a good nights sleep. This morn I wake up and
I’m guessing it was tuned to some fuel in the USA at x altitude, then is at a different altitude and different fuel

 

[deye223]

Sometimes my saws get tuned up to 3 times a week depending on where I am working and that can be anywhere from sea level to 1000 feet above and also air temperature changes tune