WANTED Cheap 50cc Lightweight

[MarcS]

Something like a Echo 4920 or Jonsered 2051. Doesn’t have to be a shelf queen just not banged up. 2051’s are getting old now but always wanted a decent one. Interested in the 4920’s over the 4910’s mainly because I have a pile of small mount Husky bars already. Not interested in any of the 346 variants. Thanks.

 

[jacktheripper]

I'll be putting together a poulan 2800 with a 54cc top end within the next couple weeks. Will probably sell it on here.

 

[Ryan Browne]

S

SELLING Thread 'Dolmar ps510'

Jan 12, 2025

Looking to move this little 510 along. Starts runs and oils. Only ran about a tank of fuel through it since I got it seems to run good. Piston is in good shape has 460 style non cat muffler on it. It does have aftermarket coil on it everything else is oem. Looking to get $225 plus shipping or possible trade for dolmar 7900 or 9000 series parts. Or Husqvarna 346 or 395 parts.

• Shane¹
• Replies: 12
• Forum: Whole Chainsaws for Sale/Trade

• 

 

[farminkarman]

Something like an Echo 4920 or Jonsered 2051. Doesn’t have to be a shelf queen just not banged up. 2051’s are getting old now but always wanted a decent one. Interested in the 4920’s over the 4910’s mainly because I have a pile of small mount Husky bars already. Not interested in any of the 346 variants. Thanks.

If you are good with a 4920, why not just get a new one?

 

[MarcS]

If you are good with a 4920, why not just get a new one?

I figured I’d see if someone on here had one, realized it was a turd, and would sell it at a discount over new. But I may just stop in and pick one up if it comes to it.

 

[jacktheripper]

Actually, for the love of all things good, just buy that dolmar. You won't get a better saw for less

 

[Likesaws]

Dolmar +1

 

[Woodwackr]

Something like a Echo 4920 or Jonsered 2051. Doesn’t have to be a shelf queen just not banged up. 2051’s are getting old now but always wanted a decent one. Interested in the 4920’s over the 4910’s mainly because I have a pile of small mount Husky bars already. Not interested in any of the 346 variants. Thanks.

I have a jons 2050 turbo...been on CL for a while now.
$100+ ship. New 18” Ore bar, good chain

 

[Jusgunn3]

I’d go with the Dolmar for sure, almost went for it but have enough 50cc saws.

 

[MarcS]

I appreciate the vote of confidence on the Dolmar. I had a 5100s (early one with the sticker that bragged 14,500) when they first came out and it was a good saw but I’m looking to change it up to something I haven’t had.

 

[sawfun]

Good luck on the 2051, that might be the hottest 50cc saw ever. Tons of rpm, less torque though, oh and properly ported they can spank a ported 346. They are,as are parts, hard to find. Still, that said, I kept my 346 as I can get parts for it and don't need 14.5k + rpm.

 

[Likesaws]

My Number two choice, would be Echo low cost very dependable.

 

[MarcS]

On a whim I bought a Makita/Dolmar 5600 for $420 out the door at a local shop that had some leftover. Seems like a pretty nice little saw, looking forward to using it.

 

[Powerstroke Cowboy]

On a whim I bought a Makita/Dolmar 5600 for $420 out the door at a local shop that had some leftover. Seems like a pretty nice little saw, looking forward to using it.

Red or teal? That's a good price. I'm on the hunt for a teal one. Might have to jump across the pond to find it though.

 

[MarcS]

Red or teal? That's a good price. I'm on the hunt for a teal one. Might have to jump across the pond to find it though.

Red, like all proper saws

For a farm saw I think they packaged quite a bit of value in it with the captured bar nuts, dual spikes, rim sprocket, and momentary on/off switch. I left the supplied b/c in the box and I’ll put a Total 18” setup on it today and try it out. If it’s a decent runner I’ll be happy.

 

[hacskaroly]

Red, like all proper saws

Psshhhh....Yellow!