SteveinUT
Have gun - will travel
- Local time
- 5:57 AM
- User ID
- 34
- Joined
- Dec 16, 2015
- Messages
- 300
- Reaction score
- 1,031
- Location
- Southern Utah
Pretty sure they do, but can someone confirm for me that the Husq 61 shares the same case as the 266?
61 and 266
- Thread starter SteveinUT
- Start date
- Local time
- 7:57 AM
- User ID
- 344
- Joined
- Dec 30, 2015
- Messages
- 4,534
- Reaction score
- 25,231
- Location
- Georgia
10-4
162SE/61/66/266SE/XP/268/XP/272XP Husqvarna 625/630/SUPER/670/SUPER/CHAMP Jonsered all the same chassis.
There were some slight variations though, coarse thread vs. fine thread for the clutch and early saws use a two piece ignition vs. later one piece ignition so different flywheels and cases accordingly. But all one stroke so all top ends can be swapped (with related intake stuff, 61 had its own unique intake block ( not positive but the 66 may be the same), I believe the 162SE, 266, and 630 share a block, 268 and 272 share a block, 625 and 670 use a boot) and most covers.
Joe
162SE/61/66/266SE/XP/268/XP/272XP Husqvarna 625/630/SUPER/670/SUPER/CHAMP Jonsered all the same chassis.
There were some slight variations though, coarse thread vs. fine thread for the clutch and early saws use a two piece ignition vs. later one piece ignition so different flywheels and cases accordingly. But all one stroke so all top ends can be swapped (with related intake stuff, 61 had its own unique intake block ( not positive but the 66 may be the same), I believe the 162SE, 266, and 630 share a block, 268 and 272 share a block, 625 and 670 use a boot) and most covers.
Joe
Last edited:
SteveinUT
Have gun - will travel
- Local time
- 5:57 AM
- User ID
- 34
- Joined
- Dec 16, 2015
- Messages
- 300
- Reaction score
- 1,031
- Location
- Southern Utah
Thanks Joe! Great info!
