HUSQVARNA 562 mark 1

[lehman live edge slab]

I have a mark1 562 I’m working on for a local tree guy, has no spark and I’ve checked over everything else so I’m figuring a dead coil. Question is will any mark one 562 coil work or is it all by serial numbers and do I need to have it reset with the husky program or will cutting with it be enough to dial it back in. One of the few guys left at the mine that haven’t switched to Stihl so still need to fix the orange step child saws too.

 

[Poleman]

It will need the like coil number to match the carb.

 

[lehman live edge slab]

It will need the like coil number to match the carb.

Ok or a reprogramming if different as long as it the very first one I have gathered after some research. Very first one was different megahertz than the rest I was reading but all others will work if reprogrammed supposedly.

 

[Bill G]

Doesn't it have a lifetime ignition warranty?