55 presence lever spring

[5155]

I want to take it from one and put into another saw,
I removed upper roll pin and the little side plates on throttle handle.

Do I need to remove anything else to retrieve that spring?
As in the lever itself or another pin?

Seems a tricky little thing.

 

[Duce]

If you are not removing trigger, twist lever to the right, little forward pressure, then pull back and out. Spring will be connected to lever by a plastic nub. Can be trying at times. Presence lever front arm must clear trigger.

 

[5155]

Thanks I figured a trick to it.
I'll try as you said but may have to get better eye balls on it.
Glad the trigger can stay put.

 

[5155]

I got it.
Problem with old one was it was not there.
I did have to remove second pin.
This model is different from modern ones
according to parts pics .
Saw is a little happier.
I call this one my work saw because I work on it more than with it.