462 Felling dogs

[Dustin4185]

I want/need bigger dogs for my 462, but don’t want the large ones. My 362 has some smedium sized spikes that work great and still fits in the plastic Stihl case. Does Stihl or anyone offer a similar setup for the 462? I tried searching on here but couldn’t find anything.

 

[sawmikaze]

I want/need bigger dogs for my 462, but don’t want the large ones. My 362 has some smedium sized spikes that work great and still fits in the plastic Stihl case. Does Stihl or anyone offer a similar setup for the 462? I tried searching on here but couldn’t find anything.

Buy the dawgs from the 064.

 

[sawmikaze]

1122 664 0505 A is the inner

1122 664 0504 A is the outer

And then the botls if you need them..obviously.

 

[Dustin4185]

1122 664 0505 A is the inner

1122 664 0504 A is the outer

And then the botls if you need them..obviously.

View attachment 403015

Thanks!

 

[sawmikaze]

Thanks!

If you have a half wrap clutch cover you'll need to give the outer a tiny rub..but they still line up and you can use the roller chain catch if you like.

On the west coast cover you don't need to..I don't know why.

 

[sawmikaze]

Thanks!

Or you can buy these if AM doesn't bother you. Same same.

LARGE Stihl Dawg Bucking Spike Set for Almost All Models - 026 029 038 044 046.. | eBay

Large Stihl Dawg Bucking Spike Set for Almost All Models - 024 026 028 034 036 MS360 038 044 MS440 046 MS460 064 066 MS660 etc. 046 and MS460 has a longer case.

www.ebay.com

The bottom spike on these doesn't bite as hard as the standard R model dawgs, they are ideal for 462s in Hardwood.

 

[Catfishclark89]

On the standard R model dawgs I cut the bottom spike even with the other teeth. And like previously mentioned, it’s about right for hardwoods

 

[Dustin4185]

If you have a half wrap clutch cover you'll need to give the outer a tiny rub..but they still line up and you can use the roller chain catch if you like.

On the west coast cover you don't need to..I don't know why.

Same on the 362. I had to space them out with a small washer or grind them a touch.

 

[SCHallenger]

I want/need bigger dogs for my 462, but don’t want the large ones. My 362 has some smedium sized spikes that work great and still fits in the plastic Stihl case. Does Stihl or anyone offer a similar setup for the 462? I tried searching on here but couldn’t find anything.

I bought the large ones & then put them on the grinder to shorten them all by about 1/2 in. The bottom one is no longer than the top 4 & was shortened by about 3/4 in.